Idle Tuning after TC install
02-26-2006, 08:48 AM
#1
TECH Veteran
Thread Starter
iTrader: (6)
Join Date: Nov 2003
Location: Tallahassee, FL
Posts: 4,397
Likes: 0
Received 0 Likes
on
0 Posts
Idle Tuning after TC install I just installed a 2800 Fuddle torque converter.
Everything is good except for the idle is fluctuating when you blip the throttle.
For example, I was in the drive thru at McDonalds this morning and as I pushed the peddle to roll forward a bit, the tach fell down to 200rpm and slowily restabled itself at 550rpm.
Can I tune this out?
Everything is good except for the idle is fluctuating when you blip the throttle.
For example, I was in the drive thru at McDonalds this morning and as I pushed the peddle to roll forward a bit, the tach fell down to 200rpm and slowily restabled itself at 550rpm.
Can I tune this out?
02-28-2006, 01:17 AM
#2
First Off I Am Very New To Hptuners ... But Id Try The Throddle Cracker Table I Had A Simlar Prob And That Fixed It For Me My Car Had Some Strange Values In The Lower Values And It Would Stall If You Hit The Breaks After A Rev But After That It Went Away
..good Luck
..good Luck
