[rant] Maximizer 2 [/rant]
05-02-2006, 03:50 PM
#1
[rant] Maximizer 2 [/rant] I installed the whole system and came down to wiring up the wideband and found out the f88king thing isn't going to work. The Max 2 is programmed with some gay 
non-linear curve that FJO preprograms. My hopes were it was going to be some linear curve and I could change the LM1 output but its a no go. After spending well over $500 for the Maximizer 2 and $1400 for my widebands/tuning software, I refuse to spend more money on their wideband with a retarded output curve.
Any other ways I can get around this? I need to have a specific curve fed into the Maximizer 2 based on A/F
non-linear curve that FJO preprograms. My hopes were it was going to be some linear curve and I could change the LM1 output but its a no go. After spending well over $500 for the Maximizer 2 and $1400 for my widebands/tuning software, I refuse to spend more money on their wideband with a retarded output curve. Any other ways I can get around this? I need to have a specific curve fed into the Maximizer 2 based on A/F
05-02-2006, 10:04 PM
#5
10.00 .81
10.25 .91
10.50 1.01
10.75 1.11
11.00 1.21
11.25 1.31
11.50 1.42
11.75 1.52
12.00 1.61
12.25 1.71
12.50 1.80
12.75 1.88
13.00 1.97
13.25 2.06
13.50 2.14
13.75 2.22
14.00 2.30
14.25 2.38
14.50 2.45
15.00 2.54
16.00 2.68
17.00 2.80
18.00 2.91
19.00 3.00
20.00 3.10
I know I can half *** it and get it to work but I want it to be able to work correctly
10.25 .91
10.50 1.01
10.75 1.11
11.00 1.21
11.25 1.31
11.50 1.42
11.75 1.52
12.00 1.61
12.25 1.71
12.50 1.80
12.75 1.88
13.00 1.97
13.25 2.06
13.50 2.14
13.75 2.22
14.00 2.30
14.25 2.38
14.50 2.45
15.00 2.54
16.00 2.68
17.00 2.80
18.00 2.91
19.00 3.00
20.00 3.10
I know I can half *** it and get it to work but I want it to be able to work correctly