Need LS1 Edit file
05-04-2006, 11:00 AM
#1
Teching In
Thread Starter
Join Date: May 2006
Location: San Antonio
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Need LS1 Edit file Hello,
I have a C5 corvette with a modified Speed World Challenge engine. We are building this car for road racing, but the engine is stumbling pretty bad. I was hoping someone may have a similiar setup and allow us to use their LS1 edit file. We need a good starting point. Thanks for your time.
Heads
88958622 Head, Gen 3 Alum Racing
Cam Shaft
88958606 Roller Cam shaft Gen 3
Requires hollow stem intake valves P/N 12565311, hollow stem - sodium filled exhaust valves P/N 12565312, and valve springs P/N 125565313. It features .570" intake and exhaust lift, 251 degree exhaust duration at .050" and 239 degree intake duration at .050".
Thanks again,
Brady Morehead
drmorehead@yahoo.com
I have a C5 corvette with a modified Speed World Challenge engine. We are building this car for road racing, but the engine is stumbling pretty bad. I was hoping someone may have a similiar setup and allow us to use their LS1 edit file. We need a good starting point. Thanks for your time.
Heads
88958622 Head, Gen 3 Alum Racing
Cam Shaft
88958606 Roller Cam shaft Gen 3
Requires hollow stem intake valves P/N 12565311, hollow stem - sodium filled exhaust valves P/N 12565312, and valve springs P/N 125565313. It features .570" intake and exhaust lift, 251 degree exhaust duration at .050" and 239 degree intake duration at .050".
Thanks again,
Brady Morehead
drmorehead@yahoo.com
