BigDB

when I first got the car it threw a code, the guy got it cleared and it ran without a code for about a month. Friends with cammed LS1's said itll come on every month or so. Well I chaged out my TR55's for some TR6's in prepperation to spray. It ran better for a lil but then threw a code, cleared it, comes back. Now every 3-4 days i have to get the code cleared, it only appeares at idle. Could my plaugs be fouled allready due to not spraying on them, maybe wires, or a coil going out. Car was tuned after the cam install.

old and good

iTrader: (3)

im having the same problem and i just changed my plugs to tr55's and i also got 8.5mm plugwires. so it defenately isnt the plugs or wires. i also have tryed running diferent ocane gas and it has no effect. for thoes who are not shure what code this is its code 300(multible missfires) mine also just happens @ idle. please let me know if you find out whats wrong with yours if noone knows whats wrong

BigDB

I only run premium gas 93octane. Plugs have 2,000 miles on them, and wires were on the car when I got it but less then 30,000 miles

old and good

iTrader: (3)

Culd this have anything to do with the fuel filter?

BigDB

u know it could, if its restricting enough it can cause the fuel mixture to be lean. Only thing is mine runs rich due to a nitrous tune. At idle u can smell the fuel

BigDB

bump back up since car still does it. I dont clear the code anymore since its so fequent. After driving for a while it goes off but comes back on later down the road. Only comes on at idle

old and good

iTrader: (3)

same here..... but ocationaly goes on when slowing down