More Tuning issues with the 402
#1
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Jul 2005
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
More Tuning issues with the 402
I am going crazy with this car. The dyno shop cant seem to get it to run right. The IAC steps are not moving from 149 and they say that is a problem. They told me they were doing a Speed density tune on a different operating system. They used EFI live to remove the MAF from the system. I plugged my scanner in and I still show readings coming from my MAF. If I unplug it the car barely runs and stalls if you touch the throttle. If I take off the hose connector from the TB to the air bridge and leave the MAF plugged in it still doesnt run. They told me the tuning problems are because of the Cam and the 90mm Throttle body that was ported. Anyone in Ohio have a Stock TB I can try.
#2
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Jul 2005
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
www.hotrodz.org/vette/files/tune
That is my current tune that they say is Speed density. I read it off the car with Tunercat.
That is my current tune that they say is Speed density. I read it off the car with Tunercat.
#6
TECH Fanatic
iTrader: (4)
Join Date: May 2002
Location: Fairview Heights Illinois
Posts: 1,851
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Cannons
They told me they were doing a Speed density tune on a different operating system. They used EFI live to remove the MAF from the system.
tuners + drugs =