PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

need help! Tuning prob. after gear swap

Thread Tools
 
Search this Thread
 
Old 10-15-2006, 02:00 PM
  #1  
Staging Lane
Thread Starter
 
old93ta's Avatar
 
Join Date: Sep 2005
Location: waco, tx
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Default need help! Tuning prob. after gear swap

I went from 2.73 to 4.10 gears in my 2000 Z28 and With the stock tune it shifts ok (except won't go into 4th at WOT) but speedo is way off of course.

guy tuning the car changed the gear ratio in ls1 edit and after that it goes through the gears quickly at part throttle and locks up in 4th at 30mph(w/o any other tuning changes)

then we tried adjusting the shift mph up and down and it always did this same thing.

It also won't downshift into the right gear and shifts a little early at WOT.

Anyone have 4.10's that i can try to copy their tranny tables for ls1 edit, or have any other advice? Thanks
Old 10-15-2006, 02:45 PM
  #2  
TECH Senior Member
iTrader: (25)
 
2xLS1's Avatar
 
Join Date: Nov 2001
Location: Warr Acres, OK
Posts: 5,649
Likes: 0
Received 8 Likes on 8 Posts

Default

Not in LS1edit format, but here are the values in HP Tuners.
Attached Thumbnails need help! Tuning prob. after gear swap-410_1.jpg   need help! Tuning prob. after gear swap-410_2.jpg   need help! Tuning prob. after gear swap-410_3.jpg  



Quick Reply: need help! Tuning prob. after gear swap



All times are GMT -5. The time now is 09:28 PM.