PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Dyno results...funny read

Thread Tools
 
Search this Thread
 
Old 10-22-2006, 02:16 PM
  #1  
Staging Lane
Thread Starter
 
CantDrv55's Avatar
 
Join Date: Nov 2001
Location: WR, GA
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Default Dyno results...funny read

http://ls2gto.com/forums/showthread.php?t=112521
Old 10-22-2006, 03:04 PM
  #2  
TECH Senior Member
iTrader: (23)
 
brad8266's Avatar
 
Join Date: Aug 2005
Location: Watertown, NY
Posts: 8,797
Likes: 0
Received 0 Likes on 0 Posts
Default

Old 10-22-2006, 03:32 PM
  #3  
TECH Addict
iTrader: (10)
 
wait4me's Avatar
 
Join Date: Feb 2003
Location: warsaw, in
Posts: 2,961
Likes: 0
Received 1 Like on 1 Post

Default

looks like the gain was because the fuel was just a little lean in the other tune. Moving the af ratio closer down to 12.5 ish would make more power than a 13.5 as shown in the first pull.
Old 10-22-2006, 06:04 PM
  #4  
TECH Enthusiast
iTrader: (2)
 
Alvin's Avatar
 
Join Date: Dec 2005
Posts: 718
Likes: 0
Received 0 Likes on 0 Posts
Default

The way I understood the first post was that he picked up X horsepower that day. That could be because the tune wanted something a little different with the exhaust but regardless it was a gain. It also sounded like the first tuner didn't do a good job with the part throttle stuff.. so why jump down his throat? Maybe I missed something.
Old 10-22-2006, 06:06 PM
  #5  
TECH Addict
iTrader: (10)
 
wait4me's Avatar
 
Join Date: Feb 2003
Location: warsaw, in
Posts: 2,961
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by Alvin
so why jump down his throat? Maybe I missed something.

Im not sure why either, It was probably right when the exhaust was the other set. Every dyno will read a different number also. Hell, i can change 1 thing in 8 seconds in the dyno software and make show a gain of 50!

And also, just because an ltrim is not 0 doesnt mean it was a bad tune. That just means that the factory system is doing its job and fixing itself...




All times are GMT -5. The time now is 12:28 AM.