PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

car only runs for 10 sec

Thread Tools
 
Search this Thread
 
Old 04-23-2007, 03:51 PM
  #1  
Teching In
Thread Starter
 
chris20516's Avatar
 
Join Date: Mar 2006
Location: dallas
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
Default car only runs for 10 sec

i have a 2000 z28 and when i start the car it dies 10 sec. later.
I have checked fuel pressure and it appears to be good. so i put a scanner on the car and it threw a code saying something about the theft deterent system.
is their any way i can bypass this?
thanks
Old 04-23-2007, 04:05 PM
  #2  
TECH Junkie
iTrader: (28)
 
TAQuickness's Avatar
 
Join Date: Jan 2004
Location: Houston
Posts: 3,250
Likes: 0
Received 0 Likes on 0 Posts

Default

If the VAT's is what is killing it, then yes you can bybass it. You need to get someone with EFILive or HPT to fix you up.
Old 04-23-2007, 04:40 PM
  #3  
Teching In
Thread Starter
 
chris20516's Avatar
 
Join Date: Mar 2006
Location: dallas
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
Default car starts the dies

i had the bcm and the whole ignition.
Old 04-23-2007, 06:44 PM
  #4  
TECH Addict
iTrader: (10)
 
wait4me's Avatar
 
Join Date: Feb 2003
Location: warsaw, in
Posts: 2,961
Likes: 0
Received 1 Like on 1 Post

Default

The pcm will need to be programmed more than likely. Even after you get it running it will throw lots of codes unless you set them up correctly..
Old 04-23-2007, 08:12 PM
  #5  
TECH Fanatic
iTrader: (3)
 
sreve's Avatar
 
Join Date: Nov 2006
Posts: 1,101
Likes: 0
Received 2 Likes on 2 Posts

Default

tuning is best,this will work.
http://shbox.com/1/vats_bypass.jpg
wire colors the same on the '00. at the bcm d7 and c2 is where you wire the resistor. there are some good reads on vats here
http://shbox.com/1/4th_gen_tech1.html
Old 04-23-2007, 10:42 PM
  #6  
Teching In
Thread Starter
 
chris20516's Avatar
 
Join Date: Mar 2006
Location: dallas
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
Default car is running!!

got the car running!! i just unplugged the wires and plugged them back in on the bcm. so far so good! thanks for all the help




All times are GMT -5. The time now is 06:42 AM.