SD w/ th350, having problems with rich decel (dfco)
09-17-2007, 08:17 AM
#1
7 Second Club
Thread Starter
iTrader: (42)
Join Date: Jun 2004
Location: paducah, ky
Posts: 4,558
Likes: 0
Received 0 Likes
on
0 Posts
SD w/ th350, having problems with rich decel (dfco) from the looks of it my dfco tables are stock... since this car doesnt know what gear its in or know if its in park or not... becaues of it being a th350 what do i need to change?
the car used to be a A4 but i used a EFIlive COS3 i believ it was....
the car is boosted and as soon as i let off the throttle or coast down a hill the afr hits high 12's low 13's.... i have it commanded to 14.7 in those cells but no luck... but when i touch the gas again it goes to about 16.x afr.... it keeps telling me to pull fuel out of that area of the ve but i know that is not the case any more...
i have a feeling its because of the tranny swap...
any help or pointers is appreciated.
the car used to be a A4 but i used a EFIlive COS3 i believ it was....
the car is boosted and as soon as i let off the throttle or coast down a hill the afr hits high 12's low 13's.... i have it commanded to 14.7 in those cells but no luck... but when i touch the gas again it goes to about 16.x afr.... it keeps telling me to pull fuel out of that area of the ve but i know that is not the case any more...
i have a feeling its because of the tranny swap...
any help or pointers is appreciated.
