Idle & tuning for a 228R cam with HPtuner.. HPtuners help please!
01-10-2008, 02:05 PM
#1
Launching!
Thread Starter
iTrader: (8)
Join Date: Jun 2006
Location: Memphis, TN
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Idle & tuning for a 228R cam with HPtuner.. HPtuners help please! I am about to install a Comp cam 228/228 .581/.581 112LSA.
I have HPtuner and I want to know before hand what to do to get the idle right and have it running good when I leave out of the shop. HPtuners please help so that I know I'll be able to drive it...its my daily driver and I'm preparing a tune for it so all I have to do is flash it after the install and see how it goes. Thanks!
I have HPtuner and I want to know before hand what to do to get the idle right and have it running good when I leave out of the shop. HPtuners please help so that I know I'll be able to drive it...its my daily driver and I'm preparing a tune for it so all I have to do is flash it after the install and see how it goes. Thanks!
01-14-2008, 07:49 AM
#3
TECH Resident
Just as a ball park adjustments add 2 accross the board to the Idle Airflow table. This should take you to nearer 10 on the warmed up area.
Idle speed, increase to about 950 RPM. +100 on A/C idle.
You will need to adjust VE by tuning, but this adjustment should get to ticking over.
Idle speed, increase to about 950 RPM. +100 on A/C idle.
You will need to adjust VE by tuning, but this adjustment should get to ticking over.
