Lock on Tunes?
#1
Teching In
Thread Starter
Join Date: Sep 2007
Location: Ormond Beach, Florida
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Lock on Tunes?
Does nebody know whether or not that Vengeance has a lock on their tunes..my brother tried to tune my car with hptuners to make it downshift when it is supposed to but it didnt work...worked on his fine
#3
TECH Regular
iTrader: (1)
Join Date: Oct 2005
Location: Georgia
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
No error........I adjusted a whole bunch of stuff for the transmission like pressure, shift time, and shift speed since his car will only do the 3-2 at like 40. It has a new tranny and torque converter and the thing is running on a tune that was intended for like a 3k stall. So it don't shift right. It shifts just like the last tranny that bit the weenie. Acceptable but not right.
I reflashed the whole pcm instead of just doing the calibration and went to drive it and the same thing.
I probably need to turn a code on to see if it even does anything. But no I got zero errors. I even saw the gauges cycle and heard the pump kick on and off.
Any ideas?
I reflashed the whole pcm instead of just doing the calibration and went to drive it and the same thing.
I probably need to turn a code on to see if it even does anything. But no I got zero errors. I even saw the gauges cycle and heard the pump kick on and off.
Any ideas?
Trending Topics
#11
TECH Regular
iTrader: (1)
Join Date: Oct 2005
Location: Georgia
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
I am retarded almost.
Checked over the tune again.
I use hptuners
On the speedo tab the current tire and gear ratio were correct.
The calculated tire on the other hand was 33.something...WTF????
Even after I re-commit it goes back to 33.
Manually put 24.91 and bam..............The car shifts great a little too hard but I can fix that no sweat.
Now how the hell did 33 get in there and how did the guy that had it drive it that way for years?????????
Checked over the tune again.
I use hptuners
On the speedo tab the current tire and gear ratio were correct.
The calculated tire on the other hand was 33.something...WTF????
Even after I re-commit it goes back to 33.
Manually put 24.91 and bam..............The car shifts great a little too hard but I can fix that no sweat.
Now how the hell did 33 get in there and how did the guy that had it drive it that way for years?????????