PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Wiring differences between 98 and 00

Thread Tools
 
Search this Thread
 
Old 03-02-2008, 02:47 PM
  #1  
Launching!
Thread Starter
iTrader: (36)
 
1_bad_ss's Avatar
 
Join Date: Aug 2007
Posts: 290
Likes: 0
Received 0 Likes on 0 Posts

Default Wiring differences between 98 and 00

I had a 2000 and just bought a 98 trans am. I was going to switch the engine harness and computer and the gas tank from my 2000 into the 98. I believe the dash harness is different also. Do any of the other harnesses in the car have to be changed with that
Thanks
Old 03-02-2008, 03:37 PM
  #2  
FormerVendor
iTrader: (2)
 
Eurospec2's Avatar
 
Join Date: May 2007
Location: Jacksonville Florida
Posts: 668
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 1_bad_ss
I had a 2000 and just bought a 98 trans am. I was going to switch the engine harness and computer and the gas tank from my 2000 into the 98. I believe the dash harness is different also. Do any of the other harnesses in the car have to be changed with that
Thanks
You dont need to change the harness, gas tank or anything else, just re-pin the 98 harness for the 99-02 PCM, have the 02 express van fuel segment swapped into your tune with EFI Live, and your done

Give us a call if you need assistance, we are very familiar with the 98 PCM swap.
Old 03-02-2008, 05:32 PM
  #3  
FormerVendor
iTrader: (45)
 
Frost's Avatar
 
Join Date: Jul 2005
Location: Richmond VA
Posts: 5,913
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by 1_bad_ss
I had a 2000 and just bought a 98 trans am. I was going to switch the engine harness and computer and the gas tank from my 2000 into the 98. I believe the dash harness is different also. Do any of the other harnesses in the car have to be changed with that
Thanks

Man, if you already in FL, save yourself some headache and take it to see DOC and Eurospec for the re-pinning.
Old 03-02-2008, 05:32 PM
  #4  
Launching!
Thread Starter
iTrader: (36)
 
1_bad_ss's Avatar
 
Join Date: Aug 2007
Posts: 290
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by Eurospec2
You dont need to change the harness, gas tank or anything else, just re-pin the 98 harness for the 99-02 PCM, have the 02 express van fuel segment swapped into your tune with EFI Live, and your done

Give us a call if you need assistance, we are very familiar with the 98 PCM swap.
I will be calling tomorrow
Old 08-18-2008, 07:42 AM
  #5  
TECH Enthusiast
iTrader: (6)
 
-Freak-'s Avatar
 
Join Date: Jul 2006
Location: Hutchinson, MN
Posts: 571
Likes: 0
Received 0 Likes on 0 Posts

Default

Any way to swap the fuel segment in with HPTuners?
Old 08-18-2008, 09:06 AM
  #6  
FormerVendor
iTrader: (45)
 
Frost's Avatar
 
Join Date: Jul 2005
Location: Richmond VA
Posts: 5,913
Likes: 0
Received 2 Likes on 2 Posts
Default

Email the current file(s) to support@hptuners.com




All times are GMT -5. The time now is 03:48 PM.