eng sens fuse keeps popping
#3
TECH Senior Member
check if any wires are hitting the headers
If the fuse is blowing intermittently then it could be a wire that's loose, and when there's a bump or something it taps the header
if it blows immediately, then there's a dead short somewhere... MAF , O2s and I think one other sensor are all on the circuit... unplug one at a time till it stops blowing
If the fuse is blowing intermittently then it could be a wire that's loose, and when there's a bump or something it taps the header
if it blows immediately, then there's a dead short somewhere... MAF , O2s and I think one other sensor are all on the circuit... unplug one at a time till it stops blowing
#4
TECH Regular
Thread Starter
iTrader: (31)
Join Date: Nov 2006
Location: louisiana
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
check if any wires are hitting the headers
If the fuse is blowing intermittently then it could be a wire that's loose, and when there's a bump or something it taps the header
if it blows immediately, then there's a dead short somewhere... MAF , O2s and I think one other sensor are all on the circuit... unplug one at a time till it stops blowing
If the fuse is blowing intermittently then it could be a wire that's loose, and when there's a bump or something it taps the header
if it blows immediately, then there's a dead short somewhere... MAF , O2s and I think one other sensor are all on the circuit... unplug one at a time till it stops blowing