2000 harness with a 2004 LS1?
05-03-2008, 11:19 PM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Location: Macon, Ga
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
2000 harness with a 2004 LS1? Been swapping a 2004 GTO LS1 into my 95' 240sx and I just found out the PCM is different. I have a 2000 LS1 harness and a 2000 corvette PCM.
My question is will the 2000 harness and PCM work on the 2004 motor? Or is there a difference between the 2004 and pre 2004 LS1?
I searched, but had no luck. Any help would be appreciated!
My question is will the 2000 harness and PCM work on the 2004 motor? Or is there a difference between the 2004 and pre 2004 LS1?
I searched, but had no luck. Any help would be appreciated!
05-04-2008, 03:09 PM
#2
yes,
'00 f&y bodies used the 9354896 pcm.
'04 gto uses 89017739 pcm
it should work though after the pcm connectors are repinned.
check the pinouts for both and find the differences.
'00 f&y bodies used the 9354896 pcm.
'04 gto uses 89017739 pcm
it should work though after the pcm connectors are repinned.
check the pinouts for both and find the differences.
07-01-2008, 01:23 AM
#3
Registered User
Join Date: Jun 2008
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Connectors on the harness are all the same but the pinouts at the PCM are different?
