pulling cats what do I toggle off in ls1edit
08-22-2003, 12:11 PM
#1
Staging Lane
Thread Starter
Join Date: Aug 2003
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
pulling cats what do I toggle off in ls1edit I am going to pull the high flow cats on my flp longtubes and need to know what to toggle off in ls1edit to eliminate codes .This is on a 98 vette
08-22-2003, 05:38 PM
#2
TECH Apprentice
Join Date: May 2002
Location: Phoenix, AZ
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Re: pulling cats what do I toggle off in ls1edit I don't know if the vettes and the fbodys are the same, but here's what to look for:
Cat overtemp...turn off.
all codes associated with rear O2s...turn the test to off. And, P0420-P0434 turn to off (catalyst temp and efficiency stuff).
If I missed anything, please add/correct.
Cat overtemp...turn off.
all codes associated with rear O2s...turn the test to off. And, P0420-P0434 turn to off (catalyst temp and efficiency stuff).
If I missed anything, please add/correct.
