98-02 T/A headlight help
#1
Registered User
Thread Starter
Join Date: Dec 2011
Location: Kansas
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
98-02 T/A headlight help
Ok so i'm looking to pick up a ws6 found a few in my area (wichita Ks) but one mod i'm looking to do is put in non flip up headlights i've only seen them on one other T/A and that was on craigslist okc so I have no clue who makes them i've searched everywhere so any help would be greatly appreciated. Thanks.
#2
TECH Enthusiast
iTrader: (3)
Join Date: Aug 2011
Location: Van Buren AR
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
http://www.ws6project.com/user_stor/...le-headlights/
Here you go man, I've heard some terrible reviews on these though, I'd throw brass gears in there and be done with it, that is if you like the flip up style.
Here you go man, I've heard some terrible reviews on these though, I'd throw brass gears in there and be done with it, that is if you like the flip up style.
#3
TECH Fanatic
My opinion, dont waste 1000 dollares on this. i had them on this summer, now they going to be replaced with original flips with BLS upgraded lights. Poor quality, one side differs from the other- bad light output-during rain the whole lenses become all misty,very annoying.
#6
TECH Regular
iTrader: (4)
Join Date: Aug 2007
Location: Edmond, OK
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
The setup is really cheap. I bought a set used from a member on here a couple years ago and the actual light output was worse than the OE flip up lights were. It took a little bit of modification and fabrication to "correct" the failings of non-pop up designs.