ccso503

I did a search and couldnt find the answer. I have the K&N FIPK (1998-2002) cold air intake for a 99 ram air T/A. I get plenty of air, but the engine compartment is filthy from the excess dirt. Does anyone have a diagram of how to make a bezel for this area or could someone send me the dimentions of theirs?

ccso503

wow thanks guys, 171 views and not a single reply.

01badbird

probably few looks to try to help but but believe no "bezel" made for k&n volant makes a box to seal (but don't prob come separate)but I didn't like either. first one has plate where air would flow thru (and quess dust)and the second has such big box.So I put filters in front of openings I'm playing around with "box" to fit on hood to close down and seal but will be awhile but don't don't have that much dirt now and do drive it .Maybe tape opening until in not so dusty conditions.

Paul Bell

iTrader: (9)

That's right. With a heading of "Cold air intake bezel?" everybody wants to have a look at what you're talking about but as it doesn't exist, there's no replies.

01bad says to tape it so that might be the answer.....