UPDATED! Joined the Flock (Lots of Pics)
04-05-2014, 11:59 PM
#23
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Jun 2012
Location: Toronto
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
Weekly Update for you guys!
Undercoated the body of the car from last week so here is some pics. I also got all my heat shields sandblasted and powder coated! They are done in "Ultimate Chrome" so when you walk under the car you can see your reflection, it's pretty awesome to see in person!
Cleaned up the edges and gave it a machined finish look!
All in the details!
Monster ready to boogie!
Tranny bolted up!
Accessories bolted up!
Just about there boys!
more to come
subscribe to keep this alive!
Undercoated the body of the car from last week so here is some pics. I also got all my heat shields sandblasted and powder coated! They are done in "Ultimate Chrome" so when you walk under the car you can see your reflection, it's pretty awesome to see in person!
Cleaned up the edges and gave it a machined finish look!
All in the details!
Monster ready to boogie!
Tranny bolted up!
Accessories bolted up!
Just about there boys!
more to come
subscribe to keep this alive! 
04-12-2014, 08:54 PM
#27
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Jun 2012
Location: Toronto
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
Update time people!
So last time I updated you guys I was just about to get into the header install and potential motor drop by the end of the week! Well the motor is in, it runs awesome even untuned and is getting closer to being drivable every passing day!
Talk is cheap so here you guys go!
Subframe connectors came in!
Little suspension/brakes teaser
Are you ready kids!
She's in!
I got on my back for this shot so enjoy it boys!
Never thought I'd be this happy putting gas in!
Video of first startup!
http://s1052.photobucket.com/user/97...4e75e.mp4.html
After the computer learned a bit and messing around with the idle. She'll need a tune that's for sure!
http://s1052.photobucket.com/user/97...cea61.mp4.html
More to come people
-97camaroguy
So last time I updated you guys I was just about to get into the header install and potential motor drop by the end of the week! Well the motor is in, it runs awesome even untuned and is getting closer to being drivable every passing day!
Talk is cheap so here you guys go!
Subframe connectors came in!
Little suspension/brakes teaser
Are you ready kids!
She's in!
I got on my back for this shot so enjoy it boys!
Never thought I'd be this happy putting gas in!
Video of first startup!
http://s1052.photobucket.com/user/97...4e75e.mp4.html
After the computer learned a bit and messing around with the idle. She'll need a tune that's for sure!
http://s1052.photobucket.com/user/97...cea61.mp4.html
More to come people
-97camaroguy
04-17-2014, 08:39 AM
#30
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Jun 2012
Location: Toronto
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
Keep checking this thread because updates happen fast!
04-17-2014, 12:03 PM
#34
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Jun 2012
Location: Toronto
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
I appreciate the kind words
Last edited by 97camaroguy; 04-17-2014 at 01:43 PM.
04-19-2014, 09:25 PM
#35
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Jun 2012
Location: Toronto
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
Update Time!
Torque Arm I bought from a member on here. He had cut the driveshaft safety loop to clear his exhaust. I won't have to worry about the exhaust not clearing because the Dynatech system I have fits without a hitch. I had an old driveshaft safety loop crossmember UMI piece laying around collecting dust so I put it to use and chopped it and had it welded back on in the factory location so now it's a complete piece again!
Here's the piece.
The cut.
Cleaned up and painted (still drying lol)
And installed!
Mechanically the car is 100% done now. The subframe connectors went in without a hitch and everything is nicely bolted down and tweaked!
Installed the SLP Loudmouth system! She sounds mean boys!!
Looks like one of the first pics I took last month but it's a new one!
Coming down!
Got the car where I wanted it with the ground control package in the back and my coil over setup in the front. This is where it sits now!
She's dusty I know
Burnout coming soon (weather permitting)
97camaroguy! (99WS6Guy LOL)
Torque Arm I bought from a member on here. He had cut the driveshaft safety loop to clear his exhaust. I won't have to worry about the exhaust not clearing because the Dynatech system I have fits without a hitch. I had an old driveshaft safety loop crossmember UMI piece laying around collecting dust so I put it to use and chopped it and had it welded back on in the factory location so now it's a complete piece again!
Here's the piece.
The cut.
Cleaned up and painted (still drying lol)
And installed!
Mechanically the car is 100% done now. The subframe connectors went in without a hitch and everything is nicely bolted down and tweaked!
Installed the SLP Loudmouth system! She sounds mean boys!!
Looks like one of the first pics I took last month but it's a new one!
Coming down!
Got the car where I wanted it with the ground control package in the back and my coil over setup in the front. This is where it sits now!
She's dusty I know
Burnout coming soon
(weather permitting)97camaroguy! (99WS6Guy LOL)
04-27-2014, 09:10 AM
#38
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Jun 2012
Location: Toronto
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for subscribing man!
So lets get to this boys!
Gutted the whole interior to give it a nice clean and detail. Washing the floors with soap and water, wiping it all down, power washing the carpet and thoroughly getting rid of all the dirt from the previous owner (man were they messy!)
Anyways talk is cheap so I'll let the pics do the talking.
Dash pulled. AC/Heater box pulled to completely clean and disassemble. Man that thing is a bitch to take out when the motor is in
Dash back in after a long day of cleaning and will get to the rest of the interior next weekend.
Took a trip down to the states (North Tonawanda, Buffalo) to get some floor pans and rear quarters for another buddies transam so that was fun! Picked up some tires for my car while I was down there for a steal and managed to score a couple miscellaneous pieces for my WS6 including the badge for the rear panel I was missing
Here's how we got the half of a TA back to Canada LOL, it looks sketchy but it was strapped down really good and didn't budge an inch for the entire 3 hour drive.
The missing piece of my beautiful puzzle! ACQUIRED.
Cleaned up the old two faced tape
BAM, IT LOOKS SO RIGHT ON THERE!
Love this shot
Where the love of my life sits right now.
Stay tuned people!
So lets get to this boys!
Gutted the whole interior to give it a nice clean and detail. Washing the floors with soap and water, wiping it all down, power washing the carpet and thoroughly getting rid of all the dirt from the previous owner (man were they messy!)
Anyways talk is cheap so I'll let the pics do the talking.
Dash pulled. AC/Heater box pulled to completely clean and disassemble. Man that thing is a bitch to take out when the motor is in
Dash back in after a long day of cleaning and will get to the rest of the interior next weekend.
Took a trip down to the states (North Tonawanda, Buffalo) to get some floor pans and rear quarters for another buddies transam so that was fun! Picked up some tires for my car while I was down there for a steal and managed to score a couple miscellaneous pieces for my WS6 including the badge for the rear panel I was missing
Here's how we got the half of a TA back to Canada LOL, it looks sketchy but it was strapped down really good and didn't budge an inch for the entire 3 hour drive.
The missing piece of my beautiful puzzle! ACQUIRED.
Cleaned up the old two faced tape
BAM, IT LOOKS SO RIGHT ON THERE!
Love this shot
Where the love of my life sits right now.
Stay tuned people!
