Window stabalizer ???
#1
Teching In
Thread Starter
Join Date: Nov 2007
Location: Arizona
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Window stabalizer ???
Recently, the one of the plastic pegs that fitsinto the window stabalizer when the driver side window is in the up position broke off. I have been able to find the stabalizer PN (10257988), but not the actual plastic peg on the window itself. Does anyone know what that PN is for a 2002 Formula?
#5
Teching In
Thread Starter
Join Date: Nov 2007
Location: Arizona
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Odd window part
Sorry for the lateness in my reply. I'll take a picture over the weekend after weekend drill. BadGTho, I am sure that the peg actually is attached to the glass.
Y2k_ta, I don't know if it helps but it's the plastic peg that slides into the one inch felt covered square guide. One each door there are two felt guides that are adjusted to help seal the window against the weatherstripping. I'll post a picture of it regardless.
I appreciate all the help.
-Joe
Y2k_ta, I don't know if it helps but it's the plastic peg that slides into the one inch felt covered square guide. One each door there are two felt guides that are adjusted to help seal the window against the weatherstripping. I'll post a picture of it regardless.
I appreciate all the help.
-Joe