When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I知 starting to dis assembly my 04 gto to start the twin turbo process. Just seeing if anyone out there has done it and has tips and suggestions. I
using the cx racing kit essentially, but upgraded allot of stuff like fittings, flanges and what not so far.
thanks
I知 starting to dis assembly my 04 gto to start the twin turbo process. Just seeing if anyone out there has done it and has tips and suggestions. I
using the cx racing kit essentially, but upgraded allot of stuff like fittings, flanges and what not so far.
thanks
I have not done it but I知 interested in your results.
Getting close to finishing this twin turbos set up. Just figuring out how to route my return line and finishing up some vacuum lines (did them all in -4 an)
[
QUOTE=Kfxguy;20351843]My advice is to move that return fuel line away from the hot side of the turbo.[/QUOTE]
As ofif now I think I知 going to run in on the inside of the passenger fuel rail then tie it with the feed all the way back. Using some of these clips I made and some clamps
[
[img]https://cimg3.ibsrv.net/gimg/ls1tech.com-vbulletin/2000x1504/8728105f_d384_4cd4_bf9c_aaa81e6dddb9_a9507a2c5c1e5 731db10d9a16f25b93eba821912.jpeg
QUOTE=Kfxguy;20351843]My advice is to move that return fuel line away from the hot side of the turbo.
As ofif now I think I知 going to run in on the inside of the passenger fuel rail then tie it with the feed all the way back. Using some of these clips I made and some clamps[/QUOTE]
I hope that is pc or nylon you printed. Sure as hell don't want pla under the hood. Abs (might) be ok.
03-24-2021, 12:59 AM
Who has twin turbo their gto 
