Getting ready to pull the trigger
10-11-2011, 10:08 AM
#1
TECH Regular
Thread Starter
Getting ready to pull the trigger Well, after searching on here and talking to people I've narrowed down my search for some upgrades for my '06 GTO M6.
So far after talking to Texas Speed they have a head/cam set up that I'm kinda interested in.
PRC 215 heads with the TSP228R cam.
I will be adding Kooks headers and full exhaust along with a short shifter and tune.
But my big question is, does anyone know about Arizona laws with this cam set up? Is this cam too small? because I was thinking about going up a little bit more on the cam, but still want it streetable as well.
Can you guys offer any suggestions / comments?
Thanks for the help
So far after talking to Texas Speed they have a head/cam set up that I'm kinda interested in.
PRC 215 heads with the TSP228R cam.
I will be adding Kooks headers and full exhaust along with a short shifter and tune.
But my big question is, does anyone know about Arizona laws with this cam set up? Is this cam too small? because I was thinking about going up a little bit more on the cam, but still want it streetable as well.
Can you guys offer any suggestions / comments?
Thanks for the help
10-11-2011, 05:13 PM
#2
Launching!
iTrader: (10)
Join Date: Dec 2008
Location: Winter Springs, FL
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Get the Torquer V.2. Well, at least, I'm going for something in that area. I know plenty of people are happy with the 228. Its a great cam from what I have seen, and for months I was set on it. I just wanted to go a little bigger also, because I plan a heads/intake swap myself (either ported 243's/FAST or LS3 topend). So going with a heads/intake that flows much more air, I'd rather get something a little bigger to take advantage of it.
