Lots of GTO go-fast parts for sale - parting out
08-28-2012, 12:15 AM
#1
Teching In
Thread Starter
Join Date: Sep 2005
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Lots of GTO go-fast parts for sale - parting out See this thread in the CA regional section:
https://ls1tech.com/forums/western-c...l#post16659267
Since some can't view it I am copy/pasting the entire OP here:
To make a long story short I have a 2006 GTO that was in the accident... It will cost too much to fix, so now it's salvaged and mine. I am looking to part out all the go-fast goodies locally, as well as all the OEM parts like a 32,000 mile interior that only had a driver's seat used, etc.
Everything electrical/mechanical is in perfect working condition. I will post the link of the engine running tomorrow.
Engine, Maggie, Fuel system, ACT Clutch, Built T56 transmission, BMR 1000HP axles have less than 500 miles on them. Built LSD true-trac diff has less than 3000 miles on it.
I'll post some pics below but here is a list of the main parts to sell.
****Fully built 418ci LS2 with Darton Dry Sleeves - still has Joe Gibbs break-in oil in it.
10:1 SCR, JE Pistons, Callies Crank and rods, custom grind supercharger cam, AFR CNC 225 heads with all new valve train from AFR, Harland sharp bearings in OEM rockers. Innovator's West 8 rib oversized pulley. This motor was last assembled by Turnkey in Oceanside. All 8 cylinders were compression checked after the accident, all of them are between 175-180psi. Oil pressure of cold running engine showed 50 psi. - $8000 obo
****Magnusson TVS 2300 supercharger.
Recently serviced by Magnusson while engine went in for rebuilt from 408 to 418ci. Underdriven Cog rear pulley, 3.0" RIP pulley in front (Extra 1:1 COG and front pulley sizes available.) ECS heavy duty tensioner. 8 rib green belt.
Last boost @ 12psi, MAF tuned but not dyno'd. Magnavolt and a new I/C will be included. $6000 obo
****Fully built T56 transmission by Anaheim Gear with all possible high performance internals. Updated B&M short throw shifter. $2500 obo
****Hydraulics - Recently installed 2QWK4U clutch master cylinder ( same as Tick's ), SS feed and bleeder lines, F-body slave. $300
****ACT twin disc clutch with billet steel flywheel. Model # T1S-G01. 10-15% stiffer pedal. Rated to 875HP/TQ. Just got broken in. $750 obo
****True-trac LSD diff with new 3.46 gears. Ring and Pinion were shot pinned and heat treated as well as polished. Built and recently serviced by Unitrax in Anaheim. $1000 obo
****BMR 300M 1000HP axles. $800 obo
****Kooks stainless LT headers with gutted "free" flowing cats. $800
****Custom built return style fuel system. $1000
****Custom built Methanol injection with methanol tank in the trunk. $600
****Gauges: SCSS A-pillar pod with AEM wideband. SCSS center dash GaTOr pod with Boost/Fuel gauges. $750
****Full black interior in pristine condition. BTW, airbags did not deploy at the impact. $ ? make me a reasonable offer
****Lots and lots of other parts to list but these are the big $ ones that I'd like to move first.
Everything else is up for grabs.
Please email all questions and requests to sales@teamscss.com ( preferred over PM box)
Shop ph # is (858)578-7277 ( do not text to this ph#, they will not get to me)
Located in Miramar.
Thanks for looking
Pic1
Pic2
Pic3
Eng1
Eng2
Eng3
https://ls1tech.com/forums/western-c...l#post16659267
Since some can't view it I am copy/pasting the entire OP here:
To make a long story short I have a 2006 GTO that was in the accident... It will cost too much to fix, so now it's salvaged and mine. I am looking to part out all the go-fast goodies locally, as well as all the OEM parts like a 32,000 mile interior that only had a driver's seat used, etc.
Everything electrical/mechanical is in perfect working condition. I will post the link of the engine running tomorrow.
Engine, Maggie, Fuel system, ACT Clutch, Built T56 transmission, BMR 1000HP axles have less than 500 miles on them. Built LSD true-trac diff has less than 3000 miles on it.
I'll post some pics below but here is a list of the main parts to sell.
****Fully built 418ci LS2 with Darton Dry Sleeves - still has Joe Gibbs break-in oil in it.
10:1 SCR, JE Pistons, Callies Crank and rods, custom grind supercharger cam, AFR CNC 225 heads with all new valve train from AFR, Harland sharp bearings in OEM rockers. Innovator's West 8 rib oversized pulley. This motor was last assembled by Turnkey in Oceanside. All 8 cylinders were compression checked after the accident, all of them are between 175-180psi. Oil pressure of cold running engine showed 50 psi. - $8000 obo
****Magnusson TVS 2300 supercharger.
Recently serviced by Magnusson while engine went in for rebuilt from 408 to 418ci. Underdriven Cog rear pulley, 3.0" RIP pulley in front (Extra 1:1 COG and front pulley sizes available.) ECS heavy duty tensioner. 8 rib green belt.
Last boost @ 12psi, MAF tuned but not dyno'd. Magnavolt and a new I/C will be included. $6000 obo
****Fully built T56 transmission by Anaheim Gear with all possible high performance internals. Updated B&M short throw shifter. $2500 obo
****Hydraulics - Recently installed 2QWK4U clutch master cylinder ( same as Tick's ), SS feed and bleeder lines, F-body slave. $300
****ACT twin disc clutch with billet steel flywheel. Model # T1S-G01. 10-15% stiffer pedal. Rated to 875HP/TQ. Just got broken in. $750 obo
****True-trac LSD diff with new 3.46 gears. Ring and Pinion were shot pinned and heat treated as well as polished. Built and recently serviced by Unitrax in Anaheim. $1000 obo
****BMR 300M 1000HP axles. $800 obo
****Kooks stainless LT headers with gutted "free" flowing cats. $800
****Custom built return style fuel system. $1000
****Custom built Methanol injection with methanol tank in the trunk. $600
****Gauges: SCSS A-pillar pod with AEM wideband. SCSS center dash GaTOr pod with Boost/Fuel gauges. $750
****Full black interior in pristine condition. BTW, airbags did not deploy at the impact. $ ? make me a reasonable offer
****Lots and lots of other parts to list but these are the big $ ones that I'd like to move first.
Everything else is up for grabs.
Please email all questions and requests to sales@teamscss.com ( preferred over PM box)
Shop ph # is (858)578-7277 ( do not text to this ph#, they will not get to me)
Located in Miramar.
Thanks for looking
Pic1
Pic2
Pic3
Eng1
Eng2
Eng3
Last edited by Teamscss.com; 08-28-2012 at 01:10 PM.
