Pontiac GTO 2004-2006 The Modern Goat

5.3 4L60E swap into 04 GTO

Thread Tools
 
Search this Thread
 
Old 09-27-2016, 11:45 AM
  #1  
Teching In
Thread Starter
 
gingerbredman00's Avatar
 
Join Date: Apr 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default 5.3 4L60E swap into 04 GTO

Long story short I have an angry little 5.3, 4L60E, harness, ECU, ect.. (everything from the engine bay) I pulled from a truck I sold as a roller.
I just picked up an 04 GTO as a roller and would like to "build" this.
I have the GTO oil pan, alternator, water pump, A/C condenser, and the GTO still has the wiring harness.
Essentially Everything was left in the GTO except the long block, T56, and driveshaft.

Other than the driveshaft, shifter, transmission lines, and transmission mount I believe I have everything to do the swap.

So far I have about $60 out of pocket into everything, so it makes sense to put this together and possibly sell the car, or spray the **** out of it and have fun.

If anyone on here has done this type of swap am, I missing anything?

Last edited by gingerbredman00; 09-27-2016 at 12:07 PM. Reason: Grammar error
Old 09-27-2016, 03:17 PM
  #2  
TECH Regular
iTrader: (11)
 
Buzzmanb12's Avatar
 
Join Date: Dec 2005
Location: BAMA
Posts: 405
Likes: 0
Received 1 Like on 1 Post

Default

Reluctor wheel on your 5.3 maybe, they are different from 04 to 05/06 because 04's use ODBII vs CAN BUS for 05/06 GTO's...



Quick Reply: 5.3 4L60E swap into 04 GTO



All times are GMT -5. The time now is 01:04 AM.