NA Moster Build is Coming to an End :)
#1
10 Second Club
Thread Starter
iTrader: (24)
Join Date: Jul 2007
Location: Texarkana
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
NA Moster Build is Coming to an End :)
Well the day arrived yesterday when I left my GTO "Nellie" with my Tuner/Installer to put on the remaining pieces to the puzzle. To go with that monster Mega Death Cam (will finally breathe) we have Patriot LS6 Stage II 59cc Heads, a Fast 90mm intake manifold, 90mm Nick Williams throttle body, and the tune with the 150 shot. Assuming all goes well I should have the car back next week with close to 500rwhp NA and 600+ on the juice
Trending Topics
#12
10 Second Club
Thread Starter
iTrader: (24)
Join Date: Jul 2007
Location: Texarkana
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
It is a pretty easy install, go to Lowes or Home Depot or local hardware store and buy a 4" - 4.5" hole saw, attach to drill and drill away. Before I made my whole I put the hole intake together minus the filter, bolted it up and took a sharpie to mark where the hole needed to be.
#13
10 Second Club
Thread Starter
iTrader: (24)
Join Date: Jul 2007
Location: Texarkana
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
Just got some numbers in and video and graph to follow. I am pretty happy overall except I need a new clutch now, no worries already have the new Bird of Prey in and is being put in on Monday.
Now for the numbers
NA: 480rwhp 460tq
N20 592rwhp 681tq
The numbers are a little low as the car was being tuned at the same time and this was run 4 and 5. Overall pretty good! My tuner is letting it sit for a while and will dyno again.
Now for the numbers
NA: 480rwhp 460tq
N20 592rwhp 681tq
The numbers are a little low as the car was being tuned at the same time and this was run 4 and 5. Overall pretty good! My tuner is letting it sit for a while and will dyno again.