SBC Parts, Roller Rockers, 383 short block, Victor Jr intake, Accel 1550 cfm TB, etc
02-07-2015, 10:21 PM
#1
TECH Fanatic
Thread Starter
iTrader: (10)
Join Date: Feb 2005
Location: GA
Posts: 1,474
Likes: 0
Received 0 Likes
on
0 Posts
SBC Parts, Roller Rockers, 383 short block, Victor Jr intake, Accel 1550 cfm TB, etc Category: Engine - Complete Motors
Price: $1
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): GA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LT1/LT4, Small Block
LS Engine?: Fits LS Engine
Going to split the Engine up....so here we go:
1)
A) 383 SBC engine. 11:1 compression Probe Forged pistons with 64cc heads, Eagle crank and rods, Total Seal piston rings, ARP rod and main cap bolts. B&B 6 qt oil pan with crank scrapper and windage tray. Also comes with SFI flexplate and balancer. External balanced rotating assembly. Block is a 638 with factory hyd roller bosses. 1 piece rear main seal and bored .030 over and decked down to 9.008 from 9.025 - SOLD
2) Edelbrock Victor Jr. MPFI intake with fuel rails port matched to FelPro 1205 - SOLD
3) Accel 1550 cfm Throttle body - $350 (Comes with a 2" spacer as well as a custom 1 stud bracket)......SOLD!
4) Extreme velocity hat - SOLD (comes with 1.5" spacer for throttle linkage clearance)
5) Edge Racing Converter for 4L80e, 3400 stall, 2.3 STR. Its their top of the line verison, has 500 miles on it at best and only 3 1/8 mile passes - SOLD
6) TCI EZ-TCU for 4L80e, 4L60e, 4L65e, etc. - $450....SOLD!
7) Procharger bracket with spring tensioner upgrade (will come with all bolts including the manual tensioner, crank pulley, all belts I have and two pulleys (4.00 and 4.25). Bracket new is a little over $500 without all the belts, pulleys, etc. Asking $550 (I'll throw in an ARP dampener bolt as well with it). This bracket is setup for a 3rd gen Camaro/Firebird with TPI......SOLD
8) PowderCoated Serpentine TPI belt system (Metal silver was the color), comes with alternator (145amp), water pump with pulley and stainless steel bolts, SMOG pump pulley delete, brand new Goodyear Gatorback belt will be included - SOLD (Can add crank pulley if needed)
9) Stock distributor with no module - $30
10) Stock Distributor with 369 module - $50
Last edited by YenkoST; 05-26-2015 at 07:07 AM.
