FS: Heads, Cams, Pushrods, Headers, LS6 intake, Balancers, and more
FS: Heads, Cams, Pushrods, Headers, LS6 intake, Balancers, and more TCI Elastomer Balancer for C5 w/ A/C, 25% underdrive (Part # 872035). This one is brand new in box and is $330 from most parts sites. $300
Late-model 4.8/5.3 706-casting cylinder heads, assembled. Unknown mileage, but they are pretty clean. $220
6.0 Rods and Pistons, pulled out of truck motor, no problems. $100
Diamond 11500 3.905” pistons pinned on to stock LS1 cracked rods w/ ARP rod bolts. Street miles only, no nitrous. No rings included. $400
Smith Brothers 7.375” pushrods, like new. $90
Smith Brothers 7.320” pushrods, like new. $90
Smith Brothers 7.415” pushrods, like new no miles. $100
All of these pushrods are 3-piece w/ 5/32” radius ball.
CamMotion 246/250 .634/.627 113+3
Great 408 cam! Good drivability and can make 520+ RWHP with great torque.
Cam has about 5k miles and is in the box w/ its cam card. $250
CamMotion 239/243 .612"/.618" on a 112+2
This is an aggressive cam for stock cubes (most likely needs flycutting or reliefs depending on head used). This cam has about 2k miles on it, we pulled it out when we went to a bigger motor. Have box and card. $200
CamMotion 257/260 .645”/.660” 111+3
Cam ground for max effort 12:1 408+ cubes with big cathedral-port heads. Installed, but never ran, changed heads. In box w/ card. $300
I have more pictures if you need.
All prices plus shipping, Paypal or MO accepted.
If you are interested in something, and want to make a deal, it’s best to call. I can’t get to the forums too much. My cell is 214-674-0141.
Thanks!
John
Late-model 4.8/5.3 706-casting cylinder heads, assembled. Unknown mileage, but they are pretty clean. $220
6.0 Rods and Pistons, pulled out of truck motor, no problems. $100
Diamond 11500 3.905” pistons pinned on to stock LS1 cracked rods w/ ARP rod bolts. Street miles only, no nitrous. No rings included. $400
Smith Brothers 7.375” pushrods, like new. $90
Smith Brothers 7.320” pushrods, like new. $90
Smith Brothers 7.415” pushrods, like new no miles. $100
All of these pushrods are 3-piece w/ 5/32” radius ball.
CamMotion 246/250 .634/.627 113+3
Great 408 cam! Good drivability and can make 520+ RWHP with great torque.
Cam has about 5k miles and is in the box w/ its cam card. $250
CamMotion 239/243 .612"/.618" on a 112+2
This is an aggressive cam for stock cubes (most likely needs flycutting or reliefs depending on head used). This cam has about 2k miles on it, we pulled it out when we went to a bigger motor. Have box and card. $200
CamMotion 257/260 .645”/.660” 111+3
Cam ground for max effort 12:1 408+ cubes with big cathedral-port heads. Installed, but never ran, changed heads. In box w/ card. $300
I have more pictures if you need.
All prices plus shipping, Paypal or MO accepted.
If you are interested in something, and want to make a deal, it’s best to call. I can’t get to the forums too much. My cell is 214-674-0141.
Thanks!
John
Last edited by SSP Racing; Aug 20, 2007 at 04:46 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
