McLeod RST & Flywheel, OFI turbo kit, Calipers, LS3 cam
#1
Launching!
Thread Starter
iTrader: (63)
Join Date: Apr 2006
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
McLeod RST & Flywheel, OFI turbo kit, Calipers, LS3 cam
Category: Engine - Power Adders
Price: $1
Location (State): OH
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
$75 shipped for the fronts
$70 shipped for the rear
Stock rockers and stands $70 Shipped
Stock LS3 camshaft $125 Shipped
Caspers voltage booster $40 shipped
Rollmaster double roller timing chain with 10k miles spacers included $90 Shipped
McLeod RST twin disc clutch and McLeod Billet steel flywheel with about 5000 miles on it. $675 shipped
Last edited by Subliminal Hit; 08-13-2014 at 10:56 AM.
#2
Launching!
Thread Starter
iTrader: (63)
Join Date: Apr 2006
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
OFI complete turbo kit. 76gts turbo, 3" over k-member downpipe, A2W intercooler (1000hp), TIAL 50mm BOV, TIAL 44mm wastegate, SPAL fans, custom radiator, heat exchanger, chiller &surge tank, all silicon elbows, air filter, t-bolt and v-band clamps, oil feed and upper and lower hose. The radiator is a custom fit piece but was made with a bar-n-plate core which gave me trouble with keeping the car cool when I went to a forged engine. When I was running the stock aluminum block it cooled just fine. You will have to tap your oil pan for the oil drain or trade me for mine. I would recommend relocating your coils so you dont burn your plug wires. You will also need to trim your front bumper cover to fit the intercooler. Every clamp snd piece needed to run this is included. The kit has about 7000 miles on it.
Pm me for more info if you're interested. $3300 shipped I'll split the PayPal fees
Pm me for more info if you're interested. $3300 shipped I'll split the PayPal fees
Last edited by Subliminal Hit; 08-07-2014 at 08:23 AM.
Trending Topics
#12
Launching!
Thread Starter
iTrader: (63)
Join Date: Apr 2006
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
I almost stalled it on both passes and ended up with 2.3 60's and had some misfire issues on the top end
Good luck with yours though. It's not easy launching a 6 speed turbo car!
#13
Lol sorry to hear that. I can only imagine being on the clutch,brake,gas and trying to watch a boost gauge all at the same time...lol