06 Z06 BLK 15,630mi 740rwhp
04-21-2015, 06:50 AM
#1
Staging Lane
Thread Starter
Join Date: Jul 2007
Location: fayetteville nc
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
06 Z06 BLK 15,630mi 740rwhp Year: 2006
Make: Chevrolet
Model: Corvette
Price: $47000
Mileage: 16000
Private or Dealer Listing: Private Listing
Location (State): NC
Color: Black
Transmission: Manual
Drivetrain: Rear Wheel Drive
http://www.corvetteforum.com/forums/...i-740rwhp.html
2006 Z06 black with black/silver interior.
15,630 miles
Clear title
Located in Raeford NC
47,000 OBO
(910) 988 4!!5
The car was originally built by MTI Racing in Georgia. I was told by the previous owner that RPM in Delaware retuned it to 740HP at the rear wheels. The sheet that I was given with the car stated 722rwhp/660rwtq. I took it to the strip once and made three passes with trap speeds at 143mph. Since I have had the car I switched the cat back to Billy Boat bullets and also recently (less than 50 miles ago) had a mantic 9000+ twin installed as well as new mickey ET streets. Also I installed a tick master cylinder. I haven't even put 3,000 mile on it since purchasing it.
It’s time for it to go as I have an 87 notch-back turbo lsx project that I am starting on. Also I am looking to get back into an old school mopar.
This is the previous for sale add
http://www.corvetteforum.com/forums/...w-blk-blk.html
Here is the list of Mods.
850HP/ 776 Ft Lbs TQ at the flywheel (722rwhp/660rwtq) at 7,100 rpms @ 9 PSI on 93 pump gas without meth.
ENGINE (balanced and blue printed)
TVS 1900 with billet 8 rib drive
MTI racing LS3 CNC ported heads
10.5 to 1 compression
MTI blower cam
Callies rods and crank
Diamond forged pistons with Mahle rings
ARP rod bolts, head studs and main studs
Heavy duty ported and blueprinted oil pump
10% overdrive Innovative West Harmonic Balancer
Ported throttle body
Callaway Cold air intake
160/180 thermostat
LG long tube headers & X-pipe W/ gutted cats
B&B bullets
Dewitts radiator with built in oil coolers
Canton inline oil filter
MSD fuel booster
MSD plug wires
DRIVE TRAIN
RPM built differential with 3.90 micro polished gears and 500m stubs
C5 axels
RPM built T56 with revised 5th and 6th gear ratios and micro polished gears
Mantic 9000+ twin disk clutch, included mantic flywheel and slave cylinder (1010 ft lb tq capable) http://www.eastcoastsupercharging.co...ategory_id=480
Tick master cylinder
Stage 1 suspension upgrade (lowering, scaling the ride height, and 4 wheel alignment)
Goodrich stainless steel braided brake lines
MTI six shoot short throw shifter
CCW 550's 18x13 and 18x10.5
Mickey Thompson 345/35/18 ET Street radial II
Michelin Pilot Sport 275/35/18
INTERIOR/EXTERIOR
2008+ OEM bezel and door pulls
AEM wideband and fuel pressure gauge
Magnacharger hood
Clear bra- mirrors, rockers, rear front fenders, front rear fenders. Did have it on front bumper and lower hood but removed by last owner.
EXTRAS
GTO spares w/ wheel adapters
Stock cat back
Last edited by aaronj; 04-25-2015 at 11:14 AM.
