Built 8.8" F-body axle w/ 31 spline Moser shafts, Ford Racing Clutches
#1
Built 8.8" F-body axle w/ 31 spline Moser shafts, Ford Racing Clutches
Category: Accessories
Price: $123456
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): MI
Item Condition: Brand New
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Finally have some time on my hands so I'm going to put this back into production. These aren't for sale yet, for the time being while I'm prepping equipment/shop space I'm building a buyer list. If you're interested in getting one of these in the near future. Also, hit me up if you have any questions.
Tentative price is $1700 shipped, but this might go slightly up or down depending on how things work out with my shipping connection.
You will reuse your factory backing plates and parking brake.
SPECS
_______
-Direct F-body bolt in
-3.73 Gears
-Eaton Posi Diff with new Ford Racing Clutches
-Moser Engineering 31 Spline C-Clip axles (rated by moser for 700+ rwhp)
-stock f-body width (~64" seal to seal)
-F-body lug pattern/brake mounting/suspension linkage/torque arm mount
-Fresh pinion seal and wheel seals
-fresh carrier bearing races
-ideal backlash and pinion torque (effects rolling resistance)
-Stock 8.8 yoke (Stock driveshaft WILL work but it will need a new U-joint ($20; part# will be provided)
Last edited by jbrockwell; 11-17-2015 at 09:53 AM.
#3
Really dont know what to sell it for.
Axle shafts were $350, 8.8 housing was $100, 10 bolt donor was $100, Diff/clutches were another $160, plus raw materials for sleeves make up the cost of parts in this. Add that to my labor and the market for these and I have no clue what a fair price is. Pm an offer I suppose?
Axle shafts were $350, 8.8 housing was $100, 10 bolt donor was $100, Diff/clutches were another $160, plus raw materials for sleeves make up the cost of parts in this. Add that to my labor and the market for these and I have no clue what a fair price is. Pm an offer I suppose?
#6
Trending Topics
#10
Staging Lane
iTrader: (2)
Join Date: Jan 2013
Location: Johnstown Pa
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
I Had just recently called a vendor for a price on a 8.8 fbody bolt in and their price was $2,700 so this is a smoken deal. If only we were closer to spring I would be buying but I'm not going th be ready until then. Good luck on your sale
#12
10 Second Club
iTrader: (15)
Join Date: Mar 2013
Location: Broken Arrow, OK
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Sorry about that buddy! Didnt mean to start a trend there. I was just trying to help ya on a price idea. What you're asking is a good deal for a built rearend with a posi too! Glws brother.