Turbo, heads, solid roller items intake manifold, water pump, BS3 + more
03-24-2017, 06:49 PM
#1
Turbo, heads, solid roller items intake manifold, water pump, BS3 + more Category: Accessories
Price: $1
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird, Front wheel drive vehicles
Location (State): IL
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
Shipping cost not included.
Big Stuff 3 with IDA. Was used on turbo fbody
$1900
Midwest billet torque converter for TH400 . Was designed for turbo car.
built to hold 1000hp. 3800 stall
$1000
Bullet solid roller lifters. cost $850 brand new
Have 10 passes on them, no street miles.
$600
Borg Warner S480. 80mm, billet wheel
brand new
$1200
Mezziere Water pump with braided lines pictured
10 passes
$400
Edelbrock 90 Elbow $160
Edelbrock 90MM TB $320
Precision Air to Water intercooler .
Cast aluminium . Comes with two pipes pictured
10 passes on this intercooler
$1200
AFR 245 heads.
Ported by West Coast.
Good flowing heads here with good parts installed. Over $4000 invested in these.
Heads had 10 passes on them, got sent to West Coast to be looked over AND ported.
Definitely some good flowing heads!
AFR 245 heads.
Have best ported by West Coast Racing
Milled to 69cc
Intake valves 2.185
Exhaust 1.60
PAC 1335 800 lift spring, install height 1.790
Seat pressure of 270
Springs are good up to .800 lift
$3000 with valve springs
$2600 without valve springs
Last edited by Jimmy P; 03-27-2017 at 09:48 PM.
