Boost Race Engine parts, Diamond custom pistons - SOLD - LS1TECH

11-26-2014, 10:08 PM

#1

helicoil

9 Second Club

Thread Starter

iTrader: (104)

Join Date: Aug 2006

Posts: 1,826

Likes: 22

Received 266 Likes on 101 Posts

Boost Race Engine parts, Diamond custom pistons - SOLD

Category: Accessories
Price: $1234567890
Location (State): AL
Item Condition: Brand New
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine

I have a Brand NEW set of custom Diamond pistons made for a 2500HP application. They feature all the bells and whistles from Diamond. Gas porting, heavy wall (.220") tool steel Trend piston pins, double Diamond coating (FULL anodizing and skirt coating), double spiroloc, pin oilers, pin fitting, aluminum rod clearancing

Specs are:
.043" Top
.043" Second
3/16" oil ring

1.328" CD - set up for 3.622" stroke, aluminum rod (custom length) or 6.100" steel in standard deck height block
4.125" bore
27.7 cc dish volume
12 degree LS7 valve pockets
accommodates .850" valve lift with .100" clearance

SOLD

*Includes spirolocs and oil ring groove spacers - No piston rings.

SMRE (Steve Morris Racing Engines) custom LS solid roller camshaft for boosted application. If you don't know Steve Morris, google him. He doesn't sit around in his underwear in front of his computer spec'ing cams. This cam was designed for a a 275 radial tire Procharged car weighing 3300# for MAX HP, 7800-8200 RPM, 400", LS7 heads, P/G trans, 3.70 gear.

SOLD

Serious only,
Please contact via phone, text message, or PM

1-3-one-four-452-six-six-39

Last edited by helicoil; 12-24-2014 at 11:34 AM.

Reply Like