Sold!!! - 99-02 Fbody D1SC prcocharger kit with upgrades
08-10-2016, 10:45 PM
#1
Sold!!! - 99-02 Fbody D1SC prcocharger kit with upgrades Category: Engine - Power Adders
Price: $3700
Location (State): WA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
I have the following that is included in this setup.
-Reverse rotation D1SC procharger
-SDCE bracket setup 7.25" crank pulley
-SDCE tensioner adjustment tool
-Custom heavy duty tensioner adjustment tool
-Custom blower support bracket that braces blower and elimates twisting.
-Custom machined mount that helps stiffin up main mount. Was originally designed and used for the iron block that doesn't have all of the mounting points and slightly modified alternator bracket included to work with bracket
-3.4" blower pulley
-3.7" blower pulley
-4" blower pulley
-Newer heavy duty belt for 3.4" pulley setup
-Brand new belt for I believe the 3.7" pulley setup
-Radiator hold down bracket (may need to drill new holes depending on placement of radiators. Mine was a little further forward because I remove AC.)
-Procharger 4.5" front mount intercooler and brackets
-Complete 3" cold side tubing with couplers and clamps
-Tial 50mm blow off valve with supercharger springs
-Truck Inlet hat with large Knn filter
I had this rebuilt and upgraded from a P1 by Procharger several years ago but the car barely gets any miles out on it.
I currently have run the SDCE tensioner and a 3.4" blower pulley and I am seeing 15+ psi on 347ci ls1
If interested PM me your phone number so I can text you back. That will be the quickest response
Last edited by Staleyp; 08-24-2016 at 10:14 AM. Reason: Sold!!
