Trade/Sell Forged Ls1 0 Miles LAST DAY 4SALE 11/3-11/4
#1
Trade/Sell Forged Ls1 0 Miles LAST DAY 4SALE 11/3-11/4
Ok this ad is for my forged ls1 Longblock, It has only a couple dyno runs and the tranny kept braking so after countless $$$ its been taken apart now having it out i might want to sell it or trade it for an lsx block to handle really high boost for the future, this is a badass engine built for boost with a 9:5 compression s for specs..
LS6 Block
stock crank
eagle rods
diamond pistons
317 heads (studded)
PRC 650 lift springs
ARP head studs
ARP rod bolts
ARP crank bolt
ARP main studs
LS9 head gaskets
LS6 Valley Cover
Yella Terra Ultralight Rockers
Chromoly push rods
comp boost cam
nice black valve covers
9:5 CR
Will possibly let it go with my vic jr/custom elbow/rails also all black
built by chris that worked at 510 race engineering and gap motorsports did compression tests..
I had intentions of makin around 8-1k rwhp and now instead of running this again id rather build my car one time and try to get all the baddest parts i can in it to handle overr 1k wheel horsepower, so id trade this for a badass shortblock or take $$ to build my own..
for the intake my motor has a victor jr with custom elbow and rails, and i can throw in 60lbs injectors as well..id like to keep my intake if i get another cathedral port head motor, but yea just hit me up im willing to trade or sell as i would just like an iron block..just let me know
239 677 9197
text me anytime
LS6 Block
stock crank
eagle rods
diamond pistons
317 heads (studded)
PRC 650 lift springs
ARP head studs
ARP rod bolts
ARP crank bolt
ARP main studs
LS9 head gaskets
LS6 Valley Cover
Yella Terra Ultralight Rockers
Chromoly push rods
comp boost cam
nice black valve covers
9:5 CR
Will possibly let it go with my vic jr/custom elbow/rails also all black
built by chris that worked at 510 race engineering and gap motorsports did compression tests..
I had intentions of makin around 8-1k rwhp and now instead of running this again id rather build my car one time and try to get all the baddest parts i can in it to handle overr 1k wheel horsepower, so id trade this for a badass shortblock or take $$ to build my own..
for the intake my motor has a victor jr with custom elbow and rails, and i can throw in 60lbs injectors as well..id like to keep my intake if i get another cathedral port head motor, but yea just hit me up im willing to trade or sell as i would just like an iron block..just let me know
239 677 9197
text me anytime
Last edited by Kmspeedie; 11-03-2014 at 10:38 PM.
#6
ok so i will be looking into this motor as im going to be using it if no1 wants it, ill be able to get cam specs, and take pics if needed, text me i have some pics from when it was first put together.. this thing will eat 8-1k hp all day and just considering going a different route