2001 QSM Z06 - Forged 347, RPM Diff/Trans
05-02-2016, 07:22 PM
#1
10 Second Club
Thread Starter
iTrader: (6)
Join Date: Aug 2006
Location: Kearney, NE
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
2001 QSM Z06 - Forged 347, RPM Diff/Trans Year: 2001
Make: Chevrolet
Model: Corvette
Price: $19999
Mileage: 129000
Private or Dealer Listing: Private Listing
Location (State): NE
Color: Silver
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
Car is always garaged kept and covered.
Mods:
347ci Forged LS6 (Diamond Street Strip Flat Top pistons -2cc Valve Relief, Total Seal rings, Probe Lightweight I-Beam Rods, Clevite "H" series Main Bearings, Durabond Cam Bearings, stock GM MLS headgaskets, ARP Rod Bolts, ARP Head Bolts, 2008 LS3 Oil pan)
Ported 243 heads (flow 320cfm on intake @ .600/228cfm @ .600 on exhaust)
233/239 .598 .603 113LSA Cam
PRC .650 Dual Springs
7.400 Hardened Pushrods
Comp Trunion Upgraded rockers
Catch Can
SpinMonster Ported Fast 92/ 90mm Ported LS2 Throttle Body
Kooks 1.875" Headers
3x3 Catless Xpipe
Borla Atak Catback
25% Underdrive Pulley
Callaway Honker CAI
LS2 Timing Chain
LS7 Lifters
Ported LS6 Oil Pump
463whp/416wtq on motor
Installed in 2012 Nitrous Outlet Stand Alone Wet Plate Kit w/ Dual Bottle Braket.
Currently setup on a progressive 175shot with c16 in the standalone fuel cell.
Made 654/638 on the current setup 720/700 on a 250shot (684/693wtq on a progressive 225 shot Mustang Dyno)
LNC Time Retard 2 step Box
Billet Dual Heated Bottle Bracket
Progressive controller
Custom Nitrous Control Panel in place of ashtray w/ Aeroforce Scan Gauge and Wideband
RPM 3.91 Diff
Hardened output shafts
ECS Diff Brace
C6Z Pinon support setup
RPM LVL IV Trans w/ Centerforce DF 12" Clutch
LG World Challenge 18' Wheels
Toyo RA1 305/35/18s in rear
I'm sure I am missing a few things.
Asking $19,999 on pictured World Challenge Wheels
$18,500 on Chrome C5Z06 Speedline wheels
ltreffer@hotmail.com
Last edited by Reckless; 08-14-2016 at 06:59 PM.
