Tyler Wilson

iTrader: (6)

Category: Engine - Complete Motors
Price: $11500
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette
Location (State): MI
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine

This motor was built for my 1999 Pontiac Trans Am WS6 M6, but I have since sold the car and this engine has been in storage.

New LS3 block, New Eagle 4340 Forged 4" stroke Crank (24 tooth reluctor) New Eagle H beam rods, New LS3 heads - West Coast Cylinder heads 72cc Stage 2 - flow data: http://www.proheads.com/WCCH_L92.html
Pricing (7th line item): http://www.proheads.com/pricing.html
Manley Springs, 2.16" intake valves
CHE rockers http://www.proheads.com/images/chels1rocker.jpg

Stainless steel exhaust valves, Diamond Pistons (custom 12.5:1 compression) custom Competition Cam (west coast cylinder heads picked it out to match their heads) LS3 intake, Nick Williams 92mm TB, Fuel Injection Connection 60# 3 bar (with ev1 adapters for LS1 computer) flow matched injectors ($600 for a set today including adapters), ARP head studs, cam bolts and balancer bolts, 7.325 pushrods, ATI Damper
Improved Racing oil pan baffle
http://www.improvedracing.com/oil-pa...ffle-p-30.html
LS1 oilpan and F-body motor mounts, drilled and tapped side of block for knock sensors (knock sensors installed), internally balanced rotating assembly, the entire engine put together by Felice Performance Engines http://www.feliceperformanceengines.com

This engine was assembled new, and had sat in storage since, so it's time to sell it.
You can also reach me at tylerwilson785@yahoo.com
Every part was purchased new and assembled, includes valve covers, LS2 front cover (along with all adapters to plug and play a LS3 into a LS1 computer) and water pump.
Cam specs available upon request, it's the same cam West Coast Cylinder Heads puts in LS7's, LS2's and LS3's for a great balance of torque through the rpm range (3000-6500).
This engine was built to run on E85 or race fuel, should be around 650 HP.

2000Phoenix

iTrader: (2)

Any dyno numbers? Who did. All the work? Was it turned while sitting in storage?

madmike9396

iTrader: (29)

Bad ***

Tyler Wilson

iTrader: (6)

We never put it on the dyno, this motor has never been run.
It was never turned, Felice Performance Engines did all the work.

http://www.feliceperformanceengines.com

Tyler Wilson

iTrader: (6)

Make offer