(2) ls1 coolant crossovers
02-21-2017, 11:27 PM
#1
(2) ls1 coolant crossovers Category: Accessories
Price: $60
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): CA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Last edited by Burken01; 02-22-2017 at 09:05 AM.
04-03-2023, 12:50 PM
#3
Teching In
Hi guys.
Sorry, I know this post is very old.
I need same advice. I have a LS2 6L block with 4.030" Wisico pistons +5cc. 4" Stroker crank. My motor are smoking. I made sure the ring gup are correct (Top--0.018 Second--0.020 ). I did have a second opinion on my bore been done. And it were good with in specs. Can it be that my sleeves are to thin and allows blow by. Any advice or guidence wil be appreciated.
Sorry, I know this post is very old.
I need same advice. I have a LS2 6L block with 4.030" Wisico pistons +5cc. 4" Stroker crank. My motor are smoking. I made sure the ring gup are correct (Top--0.018 Second--0.020 ). I did have a second opinion on my bore been done. And it were good with in specs. Can it be that my sleeves are to thin and allows blow by. Any advice or guidence wil be appreciated.
04-03-2023, 01:38 PM
#4
TECH Addict
Hi guys.
Sorry, I know this post is very old.
I need same advice. I have a LS2 6L block with 4.030" Wisico pistons +5cc. 4" Stroker crank. My motor are smoking. I made sure the ring gup are correct (Top--0.018 Second--0.020 ). I did have a second opinion on my bore been done. And it were good with in specs. Can it be that my sleeves are to thin and allows blow by. Any advice or guidence wil be appreciated.
Sorry, I know this post is very old.
I need same advice. I have a LS2 6L block with 4.030" Wisico pistons +5cc. 4" Stroker crank. My motor are smoking. I made sure the ring gup are correct (Top--0.018 Second--0.020 ). I did have a second opinion on my bore been done. And it were good with in specs. Can it be that my sleeves are to thin and allows blow by. Any advice or guidence wil be appreciated.
You should open your own unless its absolutely related..
Especially on a 6 year old thread..
