416 LS3 short block
#1
Teching In
Thread Starter
iTrader: (20)
Join Date: Oct 2009
Location: IL
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
416 LS3 short block
Category: Engine - Complete Motors
Price: $5500
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): IL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
I prefer local pickup on this, or willing to ship at the buyers expense.
If I have forgotten something in the specs below, feel free to ask any questions.
5500 OBO for the 416 shortblock - see specs listed below
Specs for shortblock:
Aluminum LS3 4.070 bored block
Aligned honed crank bore
Block was decked .005 for trueness
Balanced Rotating Assembly
Torque Plate honed to 4.070
Callies dragon slayer 4inch stroker crank with 24 tooth reluctor
Wiseco -15cc pistons with upgraded rings for boost
Lunati pro billet I-beam 6.125 rods
ARP Main studs
ARP Head Studs
Kings XP Std Rod and Main Bearings
*** compression with the mast 245 63cc chamber heads was 10.7:1
*** compression with a 70cc chamber head would yield a 9:98:1
Last edited by bRAZENLS2gOAt; 03-07-2016 at 12:03 PM.
#6
TECH Regular
Curious, I can get one similar brand new from TSP for that price. Zero miles.
What makes this one better?
I'm in the market for one, just need to know why I should buy yours vs. new?
What makes this one better?
I'm in the market for one, just need to know why I should buy yours vs. new?
#7
Teching In
Thread Starter
iTrader: (20)
Join Date: Oct 2009
Location: IL
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Not the same internals. I just went to the site, and the std 416 is 4935. add the lunati pro I-beam rods 925 like what is installed in mine, and dragon slayer crank 700 to that totaling 6735. main & head arp studs which are several hundred more on top of that. I am including the oil pump and timing chain if someone wants to use them, another couple hundred. mine is custom built bearing clearance to live at higher hp levels. aligned honed, bored to 4.070, decked .005 for trueness, torque plated honed. I did everything I could to make sure it lived a happy life.
Last edited by bRAZENLS2gOAt; 03-28-2016 at 07:10 AM.
Trending Topics
#9
Teching In
Thread Starter
iTrader: (20)
Join Date: Oct 2009
Location: IL
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
sorry for the confusion. The shortblock for sale was decked .005. my current 6 bolt block that I put together was decked .010. At the time I responsed, I was working on assembling my new shortblock. Again sorry for the confusion.