HPTuners, ECM etc
11-30-2016, 06:57 PM
#1
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Aug 2009
Location: Swedesboro, NJ
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
HPTuners, ECM etc HPTuners with 2 free credits
Blue/green ECM for gen 3 with drive by wire. Unlocked with HPT for sale. Segment swap from 60 to 80e.
Cut harness for 5.3/4l80e. Wires cut near ECM for wire tuck. All tape, loom etc removed. Current Performance fuse block without fan relays, TAC module and DBW pedal that was in my G-body. Welded factory pedal to DBW sensor, pretty sure I used 2 of 3 factory holes. 200 pins for rebuilding the computer plugs instead of all that soldering.
Complete truck intake with DBW TB, flex fuel injectors and DBW TB.
Would prefer a HPT/ECM combo for $450.
Harness can be added to the group too for total of $500. Buy all 3 and I'll throw in the Dell laptop I used for HPT.
Make offer on intake, willing to sell TB with computer/harness if looking for a complete DBW setup.
Blue/green ECM for gen 3 with drive by wire. Unlocked with HPT for sale. Segment swap from 60 to 80e.
Cut harness for 5.3/4l80e. Wires cut near ECM for wire tuck. All tape, loom etc removed. Current Performance fuse block without fan relays, TAC module and DBW pedal that was in my G-body. Welded factory pedal to DBW sensor, pretty sure I used 2 of 3 factory holes. 200 pins for rebuilding the computer plugs instead of all that soldering.
Complete truck intake with DBW TB, flex fuel injectors and DBW TB.
Would prefer a HPT/ECM combo for $450.
Harness can be added to the group too for total of $500. Buy all 3 and I'll throw in the Dell laptop I used for HPT.
Make offer on intake, willing to sell TB with computer/harness if looking for a complete DBW setup.
