2001 Quicksilver z06 / Fully Forged / FI / 820 rwhp
03-21-2014, 11:27 AM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Dec 2009
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
2001 Quicksilver z06 / Fully Forged / FI / 820 rwhp Year: 2001
Make: Chevrolet
Model: Corvette
Price: $27000
Mileage: 70000
Private or Dealer Listing: Private Listing
Location (State): SC
Color: Silver
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
Car is back up for sale looking to move into a c6 z06. I've since added full 2 inch kooks headers into 3 inch kooks mid-pipes, swapped out pushrods for more preload and finished the tune. Right now its currently sitting at 821 rwhp and 686 rwtq. The only thing remaining to do on this car is a built trans and rear. I never bit the bullet on the trans or rear because I never planned on taking it to a drag strip and I'm letting the stock parts go until they break, which, by the way I drive the car they probably would last for another 70k.
2001 Corvette z06 70xxx miles on body 13xxx on drive-line.
First off before I list mods. I did not build this car but just finished it. It was well documented build on Corvette Forum. The car was built by CF member: Zeus-of-Boost link to the build thread below:
http://forums.corvetteforum.com/c5-f...-up-kinda.html
http://forums.corvetteforum.com/c5-g...pic-heavy.html
You will also find more posts about the car if you search all threads started by him.
This car is ready to go, I wouldn't hesitate to drive this car across the country. I've taken multiple 8 hour road trips and one 12 hour road trip in it and never had a single issue.
The LC-2 Wideband controller stopped working so its being sent back to innovate for RMA. The rear drag radials now have about 8 or 9k on them and they are approaching the wear bars.
Things not displayed in the pictures: The ugly hose across the intake is no longer there. The piping is painted black, the intercooler shroud is stripped down to aluminum no paint. I have updated pictures and newer videos for serious buyers.
Engine:
Iron block 408ci Stroker Fully forged ARP all around.
L92 Heads w/ PRC Dual Springs
L76/LS3 intake with DBW 90mm TB
TSP Cam 232 242 114LSA .595 and .610 lift
2bar MAP out of a cobalt
Kooks 2 inch Long Tubes
Kooks 3 inch Mid Pipes
GHL Exhaust no cats
Meziere Electric Water Pump
D1SC Procharger 3.85 Pully
Mondo BOV
8 Rib with 10% Overdrive
Fuel System
Alky Control Meth kit
A&A Corvette fuel system
Deka 80lb injectors
Stock fuel rails
Boost regulated FPR
Driveline
Thicker Tunnel Plate
DTE Trans Brace
Auto power Roll/Chassis Cage
C6 Z06 Shocks
GM T1 Sway Bars
Stock Trans
Stock Rear diff (Has been freshened up)
Monster Stage 5 Single Disc clutch
Nitto 555R II tires
MISC
Innovate motorsports LC-2 Wideband
Extra set of rear tires with about 50% Tread remaining Nitto Invo
Full Book of all receipts from the build including instruction manuals for everything.
Innovators West pulley's along with flip drive.
Dewitt Radiator
Tick shift remote clutch bleeder
Procharger remote drain tube
Receipt book for the entire build.
Asking: 27,000 firm
Please contact me via Text, Call or Email. PM's are always the last thing on my mind to check. Feel free to contact me anytime with any questions.
Drew
912-656-4405
dgpiper.06@gmail.com
The link below is for a photobucket album, the pictures are in no certain order.
http://s148.photobucket.com/user/dre...ary/2001%20Z06
Last edited by TR06; 07-24-2014 at 03:53 PM.
03-21-2014, 08:18 PM
#3
Teching In
Thread Starter
iTrader: (1)
Join Date: Dec 2009
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Found another car that I want. This is the second C5 Z ive had and the first car that ive bought that was already built. I find myself bored now in need of a project to build on. I dont think ive kept a car over a year and half in the last 10 years.
03-23-2014, 03:58 AM
#4
Teching In
Join Date: Jan 2012
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Dr. Piper,
If you don't sell this within the next few weeks bring it by the house the girls can go out and do girl **** with the baby. My car is basically sold and I'm in the market for a c6Z but I could make an exception for this possibly. I'll call you when I'm in town.
Love,
Me
If you don't sell this within the next few weeks bring it by the house the girls can go out and do girl **** with the baby. My car is basically sold and I'm in the market for a c6Z but I could make an exception for this possibly. I'll call you when I'm in town.
Love,
Me
