Roadglide99

iTrader: (6)

Year: 2001
Make: Chevrolet
Model: Camaro
Price: $7000
Mileage: 200
Private or Dealer Listing: Private Listing
Location (State): MI
Color: Beige
LS Engine?: Car has LS engine

01 Z28 Ls1 Car I bought this car, started building up and some other unique opertunities came my way, I have refused to sell the car but it is doing me no good anymore so it needs to go. I have a lot of parts that go with the car so someone could easily make half the money back off the parts but I dont have time for that NOTHING WILL BE SOLD until car is gone so dont ask.

01 Z28 200k body cleanest car I have seen dont let miles scare you, no rust anywhere car came from texas

M6 car now has auto pedals

Strange S60 4.10 gears no abs 1000miles
Strange Rear drag brakes (on car)
New Dennys Nitrous Ready Driveshaft with 1350 ujoints $700
Spohn lower control arms, believe I have a couple other sets will give also
Spohn Rear Anti-roll bar (not installed)
umi adjustible torque arm crossmember mounted w/ ds loop
Rear 3-way adj comp shocks new in box
rear Air Lift drag bags

TH400 w/brake less than 1k miles
Bought off of tech member ddr698
Trans has ultra bell and tail shaft
I cant find info I had on trans but it was built to handle atleast 1200hp
has a deep pan with 2 bungs welded into it one for temp gauge and one for drain
B&M trans cooler mounted "dope style" with braided telfon hose
Hughs SFI flexplate ARP bolts
Yank 4000 stall
Hurst Pistol Grip Quarter Stick shifter

AJE Tube K member with manual rack (not installed bare metal)
Spohn upper and lower control arms (used not installed)

Car currently has prostars on it 15x10 in rear with new 295 m/t drag radials and 3.5 up front

Also have another set of wheels with damn near new 275 bfg kdw i believe

Have an OEM SS Spoiler Red in color (300)
Aftermarket SS hood has custom paint so needs painted

Manual Brakes with line lock braided flex lines

Motor:
Right now motor is basically stock has factory manifolds and gutted cats
Ls6 intake aftermarket lid

I have everything for a cam swap T-REX cam has 500miles on it pushrods, gaskets

1 3/4 stainless headers forgot brand but they are not cheap ebay ones (not installed) think I have gaskets also

nitrous plate set up never been on car (not installed)

extra set of coils

I am sure I am forgetting a few things but I am getting out of the 4th gen stuff so I will give who ever buys the car everything I have.

Car runs and drives the converter is obviously big for car but I never got to the motor. If you put cam in car converter will be perfact for the set up

There is an issue with brakes I believe there is air still in them car stops but not all that good, but it is manual brakes

Car now has a bowtie slp grille however this grille will also go with car
Any questions feel free to ask

Thanks,
Bill
734 306 9290