Chucklee

iTrader: (3)

Looking for connecting rods for ls2 pistons in my lq4 build. If they are GM cracked rods, they must be brand new.
They must work with the floating pin on the ls2 piston. feel free to PM me offers and pictures.

JOHNNY59

iTrader: (398)

pm sent

jwcarguy

iTrader: (76)

I have a set of floating pin rods also ( low miles 11k)

Jeff

Chucklee

iTrader: (3)

I need bolt in ready rods still. (not interested in stock, used rods at this point as i already have a set with 39k on them. I just rather buy new ones than take these to machine shop for measuring. I don't have a shop I trust enough)

I would buy used aftermarket rods if they will work with my setup. (lq4/799/ls2pistons/ms3cam)

Anyone have a set of scat I beams? new or used?

PM ME

Chucklee

iTrader: (3)

Still looking for connecting rods

jwcarguy

iTrader: (76)

I still have the set available
They still have the 6.2L L99 pistons on them, but can remove if you just want rods

Thanks
Jeff

Chucklee

iTrader: (3)

STILL LOOKING FOR RODS

I don't want a GM used set I have to take to a machine shop and have checked before running. sorry (i already have LS2 set with 39k on them that i am pretty sure would be ok, but not really wanting to spend $80 on them to have checked and then have to trust a machinist i've never used) i realize there is some flaw here in methodology, but it's safer than running used, unchecked GM stuff

Chucklee

iTrader: (3)

No longer looking