2000 Trans Am 416 RWHP
#1
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jun 2004
Location: Dayton, OH
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
2000 Trans Am 416 RWHP
Year: 2000
Make: Pontiac
Model: Trans Am
Price: $7000
Mileage: 95000
Private or Dealer Listing: Private Listing
Location (State): OH
Color: Black
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
Finally selling the black beast. I purchased it in 2004, and mechanically, the thing has been as reliable as you could want. She is mostly a garage queen these days, so it is time to pass her on to someone to carry the Firebird torch.
I used to be on these forums almost every day, mostly reading and trying to gather information. I put a lot of time and thought into the powertrain mods, to make sure they were all meticulously mated to one another without any obvious bottle necks. I was more than pleased with the results, and the custom Flowmaster duals really give it a unique and menacing sound.
(more pictures below)
Edit: Price Drop.
Price: $7,000 Cash
Pros
1. Dyno: 416 RWHP 387 FT-LBS
2. Custom over the axel duals with Flowmaster 40 series (2 chambers) 2.5” race mufflers, 2.5” tubing, 2.5” Dr. Gas X-Pipe
Tucked up nicely:
The tips even have "Flowmaster" embossed on them:
More pics of the system on the original thread:
https://ls1tech.com/forums/generatio...-afterall.html
3. Patriot LS6 Heads, Custom Cam by Partick G
Heads
62cc Patriot LS6 Heads
Thread with more pics and story behind Gunnar at Patriot fixing them up for free (still to this day the best customer service I have ever seen):
https://ls1tech.com/forums/generatio...r-service.html
Cam
Custom specced by Patrick G, made by Thunder
Cam is a 230/234 112+1
It was installed with a +2 advance.
Valvetrain
7.400" Pushrods
.040" Cometics for 3.910 Bore
GM LS series camshaft lifter kit
ARP head stud kit
ARP rod bolts
The Rest
N-Motion Adjustable Timing Chain
ASP Pulley with belts
ARP bolt for pulley
30# SVO Injectors
Katech ported LS6 pump
4. QTP Stainless Steel Long Tube Headers with HVMC
5. Other Bolt-ons
6. Transmission has been rebuilt and Centerforce clutch installed
7. Firehawk Hood
Professionally repainted to paint match just this year
Cons
1. Purchased the car with a Rebuilt Salvage title
It had a rebuilt salvage title because it was stolen and recovered from the previous owner. Then I purchased it in 2004, when it had 57k miles on it. It ran like a beast since the day I bought it. I’ve put almost 40k miles on it, modded it in 2007, and it still runs like a beast and then some.
2. The chrome rims have some rust on the barrels
3. T-tops are the dot-matrix style off of an LT1 Firebird.
I used to not always lock the t-tops with a key, and I lost one on the highway. I got a pair of t-tops off of an LT1 Firebird on it now. I still have the passenger LS1 t-top if you want it.
More pictures:
Last edited by Louie83; 10-05-2015 at 11:24 PM. Reason: Price Drop
#4
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jun 2004
Location: Dayton, OH
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
Interior Pics
Top View
Driver's Side
Passenger's Side
Bucket Seats
Driver's Seat has some wear
Passenger's Seat is in pretty darn good shape (I must not have any friends)
Speedo
Driver's Side
Passenger's Side
Bucket Seats
Driver's Seat has some wear
Passenger's Seat is in pretty darn good shape (I must not have any friends)
Speedo
Trending Topics
#8
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jun 2004
Location: Dayton, OH
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
It was my main car for a while. I typically only drove the Accord when the weather was bad. It can work as a daily as long as you do not get tired of an exhaust that growls at idle and roars when you get on it.
Thanks!
Thanks!
#10
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jun 2004
Location: Dayton, OH
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
Request for Engine Bay Pictures
Clear MTI lid:
LS6 Intake painted black to match the theme:
Driver's side:
Passenger's side:
The camera and flash do not do the Stainless QTP Long Tube Headers justice. In person and in the sunlight, the stainless has some red, purple, and blue hues where they meet the heads:
Passenger view from a little farther away:
LS6 Intake painted black to match the theme:
Driver's side:
Passenger's side:
The camera and flash do not do the Stainless QTP Long Tube Headers justice. In person and in the sunlight, the stainless has some red, purple, and blue hues where they meet the heads:
Passenger view from a little farther away:
#11
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jun 2004
Location: Dayton, OH
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
Start-up and Idle Video
2000 Trans Am - Heads, Cam, Flowmaster Duals - YouTube
Edit: I don't know why it won't embed the video...I fail.
Edit: I don't know why it won't embed the video...I fail.
#20
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jun 2004
Location: Dayton, OH
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
Body is in good shape, the paint does have scratches though since it is a 15 year old car with 95k miles.
I went through an automatic power car wash once and it leaked at the top corner. So just stay away from power car washes. Also, the window motors are currently fine, but I replace them once every 3 or 4 years. If the window motors are about to go out, the windows won't go 100% of the way up and it will leak.