1000 hp capable ltx (afr227,F1-R, forged 383)
12-27-2015, 12:15 PM
#1
Teching In
Thread Starter
Join Date: Sep 2006
Location: kansas city, MO
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
1000 hp capable ltx (afr227,F1-R, forged 383) Category: Engine - Complete Motors
Price: $0
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): MO
Item Condition: Brand New
Engine: LT1/LT4, Small Block
LS Engine?: Non-LS Part
$3,500
Full forged 383 (eagle crank, double keyed with hub, compstar 6” h beam rods, diamond pistons -28cc dish) good for 8:1 with 65 cc heads.(arp rod bolts) Splayed 4 bolt main caps (arp studs and bolts) arp head studs. solid roller bullet blower cam Lloyd Elliott spec’d 244/255 dur. 115lsa .623/.623 lift with 1.6 rockers) double roller timing chain. canton oil pan with hv melling oil pump. (bolted pick up) milodan s.s. dipstick tube. Was built for strip/steet and 7500 rpm.
$1000
Jesel shaft mount rockers with comp cam tie bar solid roller lifters. (1.6 int 1.6exh)
$1800
Afr 227 65cc cnc ported heads (flow at .650 lift, 315 cfm int, 233 cfm exh) afr intake gaskets, pushrod guides, an hose and fittings for steam crossover. and fabricated sheetmetal aluminum Valve covers.
$200
Ati super damper, with double keyed crank hub.
$300
Msd igniton billet distributor with igniton pick up pn 2345
$200
Miezere electric water pump and powdercoated housing. (all unused ports welded)
$2700
Procharger F1-R and house of boost blower bracket with cog pulley setup. Fresh rebuild on the f1, impeller in perfect shape. Billet crank, blower, and idler pullies. 50mm gates belt. All hardware. Powder coated brackets.
Last edited by dropped94formula; 01-09-2016 at 10:08 AM. Reason: Price change, post edit.
