Chevyguy6993

Year: 1991
Make: Ford
Model: Mustang
Price: $14500
Mileage: 1111111111
Private or Dealer Listing: Private Listing
Location (State): TN
Color: Green
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine

1991 Mustang Ls Turbo.

1st off this car is a street car that you can drive just about anywhere. I do a lot of cruising in the car. The guy who had it before me street raced it and hurt a lot of feelings.

Original calypso 5.0 car with black interior, the car has a ls 5.3 with a precision 76 mm turbo on 17psi and e85 and would drive it anywhere, I bought this car a while back with a bad transmission. I put a TH350 in it. And a MSD 2-step. The car went 6.34@111 with a 1.54 60ft. Just like everyone else I wanted to go faster so I bought a TH400 with a brake put it in and 1st pass on the brake I slung the driveshaft on the big end and destroyed the trans and driveshaft. Then I had PTC to build me a new TH400 with a brake, I had Wiles driveshaft's in Jackson Tn to build me a race driveshaft, bought a new set of drag radials and pulled the 3.08 gears and put 3.55's in it. Now I've taken it to the track twice and I can't hook it so I'm burnt out. The car needs a anti roll bar and a roll cage but I'm done. I want something different. The only thing i can think it really needs is the arm rest on the door panels, I do have some gray ones but the driver side is rough. I'm asking $14,500 and I will consider trades that are worth $14,500. I don't want anything else to race unless it's something cheap and i get quite a bit of cash in top.

I really want a turbo reg cab silverado also will consider a fast reg can silverado mom turbo and cash

I'd like to have a nice patina rod/shop truck,

nice 900 or 1000 RZR, will trade for a. 800 RZR with cash my way.

67-69 Camaro

C5 or c6 vette

but will look at all trades that are reasonable. it has rear seat delete also, and heres a list off the of mods…..

MOTOR:
2006 5.3
LS6 intake
Head studs
PAC valve springs

TRANS:
New PTC TH400 with Trans brake.
YANK 3400 converter
SFI flywheel
hurst quarter stick
New Wiles Race Driveshaft.
I drive the car a lot and drive it up to 40 miles one way if that tells u anything, lol

REAR:
8.8 moser 28 spline axles
POSI unit but not sure the brand
full 5 lug conversion
3.55 Gears.

SUSPENSION:
AJE LSX k member
Lakewood 90/10 struts and 50/50 shocks
aftermarket upper and lower control arms
sub frame connectors

FUEL:
holley dominator fuel pumps
holley adj regulator
80lb injectors
holley fuel rails
sock gas tank with sump
E85 setup

Wheels and tires:
Greg weld 5 star with 275 MT dr like new condition
New front tires with less than 20 miles on them.

Turbo:
precision 7675
A2A innercooler

Located in Ramer, Tn. Between Selmer , Tn and Corinth, ms. WILL NOT TRAVEL.

CALL OR TEXT 731-616-6022

Chevyguy6993

Sorry I'm new here just trying to add another pic. I have tons of pics upon request.

tylrhmmtt04

Really wish you were interested in a super nice low mile gto with a cam and stall. I'd swap even in a heartbeat!

kevin87turbot

iTrader: (2)

Bump for an honest seller!

Chevyguy6993

Make trade offer.

tylrhmmtt04

https://ls1tech.com/forums/vehicle-c...cam-stall.html

You need this car lol

Chevyguy6993

I might trade on the gto but couldn't trade even.

tylrhmmtt04

Alright, I will PM you.

Chevyguy6993

Bump!!!

2002SLPSSCAMARO

iTrader: (4)

Ill trade you my roller plus $5000.00 for this car if you still have it.

HydroStream6

iTrader: (16)

More pics of interior if this is still around. Also more details on engine and exhaust please. Cam, gaskets, hardware?

Wildside

iTrader: (21)

needs a glide

Chevyguy6993

The car is sold thanks.

f-bodybuilding

This car has been in the classifieds here more than I can count. It's a beautiful car and will make a good slip when someone takes the time to sort it out. Glws!