Forged nitrous 347 motor
06-27-2014, 02:28 PM
#1
11 Second Club
Thread Starter
iTrader: (98)
Join Date: Aug 2007
Location: Frederick, Maryland
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Forged nitrous 347 motor Category: Engine - Complete Motors
Price: $9000
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): MD
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
I am selling my forged 347 motor that I built to break the stock cubic inch nitrous record. The motor is brand new never even fired up yet. It is currently sitting on the motor stand. I am getting out of racing. In my car this was projected to take the record down to the 8.5's in the quarter. I did not skimp on anything. The motor parts are as follows:
Diamond 3.905 Nitrous Dome 10cc Pistons
Eagle H-Beam 6.125 Rods w/ ARP 2000 Bolts
Polished GM Stock Crank
Clevit Bearings
Ported LS6 Oil Pump
LS2 Timing Chain
SLP Underdrive Pulley
Comp Solid Roller Cam 248/254@.673/.673 w/ 113+3 LSA
AFR Mamofied 230cc heads w/ 2.08 Intake/1.60 Exhaust Valves w/64cc chambers
ARP Head Stud Kit
PAC 1207 Valve Springs
Yella Terra 10mm Adjustable Solid Rocker Arms
Comp Endure-X Solid Lifters
Manton Pushrods 8.035 11/16's
Summit Valley Cover
Edelbrock Victor Jr. Intake Manifold Port Matched to the Heads by Tony Mamo SOLD
Scorpion 4150 Throttle Body SOLD
Edelbrock fuel rails SOLD
Racetronix 42# Injectors
I have the build sheet for the heads and cam from Tony Mamo if you want proof for those. The compression is right at 12.3:1, I was going to tune it for C16 race fuel. The heads and cam combo cost me just shy of 7,000 dollars alone. I am asking for 9,000 for the whole setup. I do have a crate that I can put this in and ship it, but the buyer will have to setup all shipping arrangements and pay for that. I accept cash, paypal and usps money orders. Local pickups to the front of the line. Open to offers, but please don't lowball me, you are getting a really fast motor for really cheap. I have over 12,000 dollars invested in it, my loss is your gain.
For the right price, I can include the nitrous kits and coils with wires. The nitrous kits are 2 direct port kits. One is tapped into the manifold and the second is the type of nozzle that sits under the injectors. I also have a brand new Meziere Electric Water Pump and custom fab tall valve covers. All of the items will be an additional cost. I will split any part of the setup apart, but only if I have buyers for everything. I can always keep it.
I am not interested in anything other then cash. Getting out of racing. Thank you.
Last edited by josh2002-ws6; 07-23-2015 at 09:32 AM.
