F-Body and LS1 Parts (headers, pushrods, TV2 cam, springs, wp, baffle, clutch master)
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jun 2011
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
F-Body and LS1 Parts (headers, pushrods, TV2 cam, springs, wp, baffle, clutch master)
Category: Accessories
Price: $1
Location (State): MO
Item Condition: Used
LS Engine?: Fits LS Engine
Painted Pacesetter long tube headers, they’re the race style, so they do not have the emissions hook ups. They have some surface rust and could use a fresh coat of paint. SOLD
Water pump (parts store brand, not AC Delco), has about 7000 miles on it (thermostat not included). SOLD
Stock clutch master cylinder, I assume it is the original from the car so it has about 110,000 miles on it. It worked fine when it was removed. SOLD
Stock oil pan baffle for F-body oil pan. $30
Front and rear stock springs that were cut, they will drop the car pretty low, I’d guess around 2 inches. $25
16 Texas Speed and Performance 5/16” x .080" wall 7.400” Length pushrods about 7000 miles. $90
16 Manton 3 series 3/8" x .095" wall 7.450" Length pushrods. These only have about 5 minutes of run time on them; they rubbed the pushrod holes in the heads and made a little noise so I got smaller diameter ones. They have slight rub marks on them but they are still straight and ready to go. $150
Texas Speed and Performance Torquer V2 cam. 232/234 .595/.598 112LSA Camshaft. It had about 7000 miles on it when taken out. PM for more pictures. SOLD
All parts were good working order when taken off the car, they are being sold as is. If using pay pal add 3% to price.
Last edited by jbruder; 02-26-2015 at 12:57 PM.
Trending Topics
#16