Turbo Kit - PT76gtsh F-body **SOLD**
11-03-2014, 08:55 PM
#1
Turbo Kit - PT76gtsh F-body **SOLD** Category: Accessories
Price: $2500
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): WI
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Turbo setup off my 99 Trans Am - Im selling it to build a new one.
*edited this ad, Selling entire setup now.
Turbo, manifolds, crossover pipe, wastegate, downpipe, intercooler, BOV, cold side piping.
Precision PT76gtsh turbo T4 rated 1150HP (same as the PT7675 just older part number) h means ported exhaust housing, coated exh housing. .96 a/r
3" stainless downpipe ends at starter with v-band flange.
Truck manifolds w/ v-bands welded on,
316 stainless 2.5" tube crossover (.065 wall).
Precision 46mm gate,
Ebay 4" intercooler w/ fod light mount brackets welded on for Transam.
3" cold side piping all tig welded.
Tial 50mm BOV.
All rubber/silicone connectors (intercooler ends and TB end).
Turbo setup has less than 2000 miles on it street car with less than a dozen passes at the track. This turbo is ideal for a 5.3L and also work on a 5.7L but I would not recommend it for anything bigger unless you were not looking to push it very hard.
------------------------------------------------------------------------
$2500. For All Im in Janesville, WI.
I had this setup on a couple engines in my car. Full weight stock suspension car on a 275 drag radial. 3660lbs w/ me in it.
-6.0L TU1 cam, Glide, 3.50 gears. E85 18psi went 9.6x @ 141 video in signature.
-5.3L (stock lower) TU1 cam TH400, 3.00 gears. 93 octane 14psi 10.50 @ 133
-6.0L TU1 cam, TH400, 93 octane/ 110 mixed, 3.00 gear, 18psi 10.00 @ 137 Car is still 100% together with this combo now.
Couple vids
Last edited by pwrtrip75; 01-19-2015 at 07:38 PM.
Trending Topics
11-10-2014, 02:45 PM
#9
I have a Racecraft k-member, not a turbo one. I am not sure if it will fit a stock one as I dont have one to even look at. It is a 3" downpipe, Here are a couple pics I just took under the car.
View of the passenger side front. My motor mount is notched from a previous kit I had with a 3.5" pipe, there is tons of room around this 3" pipe, but where a stock k-member is in relation to this I am not sure. Hope this helps.
View of the passenger side front. My motor mount is notched from a previous kit I had with a 3.5" pipe, there is tons of room around this 3" pipe, but where a stock k-member is in relation to this I am not sure. Hope this helps.
12-08-2014, 06:46 AM
#11
Bump....
Changed the ad a little, selling it all now. Complete setup. I have HP Tuners and can flash any 99 fbody PCM to a 2 bar tune, and I can put my tune in there for you for free if you want. I have the tunes from this kit used on a 5.3, 6.0, gas, and E85. It will not be a 100% tune but good enough to start the car and drive it somewhere.
Changed the ad a little, selling it all now. Complete setup. I have HP Tuners and can flash any 99 fbody PCM to a 2 bar tune, and I can put my tune in there for you for free if you want. I have the tunes from this kit used on a 5.3, 6.0, gas, and E85. It will not be a 100% tune but good enough to start the car and drive it somewhere.
12-20-2014, 05:54 AM
#13
On The Tree
Join Date: Jul 2012
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
How would this setup do on a 98 ls1 trans am? Looks like you don't retain ac, was gonna paint the car this year but this kit is very tempting. Comes with everything to install, I wouldn't have to buy anything else?
12-22-2014, 06:39 PM
#14
As far as buying anything else, fuel system and tuning and a MAP sensor, AIT sensor, oil feed and drain hoses and a drain fitting in the oil pan.