jatolbert

Category: Engine - Complete Motors
Price: $34999
Part Fits: Corvette
Location (State): AL
Item Condition: Used
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine

We have an engine to sell. The engine has less than $1000 miles on it and runs flawlessly and feels incredibly strong. The car has only been run on 6.2 psi of boost and produced 770HP to the wheels at this low boost level. The engine was built with a goal of 1200HP at 15 psi boost, which we believe will easily be reached. Its ready for boost to be turned up. The boost was not turned up as we were waiting until the roll cage was installed (wife's orders). Now the car is being brought back to stock. 1400HP can easily be exceeded by swapping to solid lift camshaft. This engine was built for street car and therefore used hydraulic roller. As you will see below, engine was built with top shelf components.

Short deck fits nicely in Z06. Selling complete engine except for fuel rails and injectors. Injectors are available. See below for engine details. Pictures can be provided at a later date.

Bore: 4.130"
Stroke: 4"
Displacement: 429 cu in
Compression; 9.08:1

1. RHS short deck block.
2. Callies 4" LS7 dragonslayer crank.
3. CP 27cc dish pistons. (LS1116)
4. Carrillo rods (66125S)
5. Mast 305cc LS7 Black label heads (2.250" titanium intake 1.800" Inconel exhaust)
6. Comp custom grind hydraulic roller (13019R/13023R HR116)
7. Lunati high rpm roller lifters
8. T&D shaft rockers
9. Fast 102 intake
10. Nick Williams 102 TB
11. MSD coils
12. Moroso billet valve covers.
13. Kooks 1-7/8 stepped headers.
14. MSD atomic force starter.
15. ATI balancer
16. Meziere electric water pump
17. DC power engineering 275 amp alternator
18. GZ performance LSXSuperpro vacuum kit.


Total receipts exceed $40K plus labor, machining, etc. Total cost to build this setup exceeds $50K. Part cost for long block alone exceeded $25K before labor, machining, etc. I am willing to separate accessories like water pump, alternator, vacuum pump, etc.

Price: $34,999. OBO. plus shipping.

Engine will be provided as complete package. We are willing to install at our shop if interested. Details to be discussed.

Drivetrain components from car available here:
http://www.corvetteforum.com/forums/...lf-shafts.html

Josh
205.300.5114
I'm happy to email an idle video for all interested. Feel free to contact me.

Turbo2L

iTrader: (1)

What version Meziere? Willing to sell it separately? I'm located near Birmingham if it is available for pickup.