MWC Stage 5 full race front suspension NEW
10-28-2014, 07:06 AM
#21
Teching In
Thread Starter
iTrader: (13)
Join Date: Aug 2005
Location: Murfreesboro, Tn.
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Category: Steering & Suspension
Price: $3200
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): TN
Item Condition: Brand New
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
10-31-2014, 11:36 AM
#28
fyi the shocks you can change to the stock "T bolt style". I did it, its just a snap ring clip on the end,if you look on the shock ends. And take (press, and there tight) the bushing out. Afco sells like 3-5 different bushing for different bolt and spaced tab mounts, and the GM T bolt setup.
10-31-2014, 02:45 PM
#29
Teching In
iTrader: (11)
Join Date: May 2010
Location: NWI
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
studdern is right i actually reused my qa1 setup i had and took the t bar style out and put the teflon bearings in it was a pain but works and the spindles only work with his control arms so you could sell the k member but the uppers lowers spindles have to stay together cause no more ball joints his stuff is incredible i have this whole setup and love it…the spindle and brake setup alone shaved 60 pounds off together and the rest shaved an additional 30 pounds off the bar stuff i had totally worth the price…bump trying to help 
11-01-2014, 07:34 AM
#30
Teching In
Thread Starter
iTrader: (13)
Join Date: Aug 2005
Location: Murfreesboro, Tn.
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
studdern is right i actually reused my qa1 setup i had and took the t bar style out and put the teflon bearings in it was a pain but works and the spindles only work with his control arms so you could sell the k member but the uppers lowers spindles have to stay together cause no more ball joints his stuff is incredible i have this whole setup and love it…the spindle and brake setup alone shaved 60 pounds off together and the rest shaved an additional 30 pounds off the bar stuff i had totally worth the price…bump trying to help
11-02-2014, 06:28 AM
#34
Teching In
Thread Starter
iTrader: (13)
Join Date: Aug 2005
Location: Murfreesboro, Tn.
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Brakes
Springs and Shocks
Steering Rack
K-Member and Motor Mounts
Control Arms and Spindles
Possibly could get it down to 4 boxes
Just guessing from past shipping I am going to estimate somewhere between 200-300.
