F/S Misc. Nitrous Swag
#1
12 Second Club
Thread Starter
iTrader: (5)
Join Date: Jul 2006
Location: Tampa, Fl
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
F/S Misc. Nitrous Swag
I will be graduating in May 2009, and having sold my F-Body I don't have much use for my nitrous goods anymore. I figure most people piece together their kits anyways, so that is most likely how I'll sell it. If you are really interested in buying the whole shebang, let me know.
My loss is your gain -- everything is priced to sell. Be realistic, don't lowball me in the nuts, and I'll be happy to ship stuff for cheap/free.
Everything is located in Gainesville, Florida. I'm really not too interested in driving to drop parts off, but I can possibly meet halfway if you're in Ocala/Jax. Otherwise, plan on it being shipped.
Dynotune Bottle Heater -- SOLD
Dynotune Digital Nitrous Pressure Gauge -- SOLD
NX Iceman Fuel and N2O Solenoids -- SOLD
Misc. Nitrous Lines and NX Shark Nozzle w/Bottle Nut -- See Below
Fuel Lines--
-4AN Swivel fitting (I used it on the test port on the back of my LT1 Fuel Rail)
12" -4AN SS Braided Line -- SOLD
Black Annodized Y-Block -4AN--1/8" NPT in to -3AN & -4AN Out -- $15 Shipped
40" -3AN Black SS Braided Line to Solenoid -- $20 Shipped
48" -3AN Black SS Braided Line to Nozzle -- $25 Shipped
12" -4AN SS Braided Line -- SOLD
Nitrous Lines--
48" -3AN Black SS Braided Line to Nozzle -- $25 Shipped
16' 6" -4AN Nitrous Source Line from Bottle to Solenoid (Standard Issue NX Line) -- SOLD
NX Shark Nozzle -- SOLD
Close up of the Black Lines
10lb NX/Compucar/Wilson Bastard Bottle -- $150 (Prefer Local Pickup)
10lb Nitrous Express Bottle. Compucar Nitrous valve with Wilson Manifolds cone filter and -4AN fitting. Works brilliantly. The bottle is currently full, so I'd love to just sell it locally with an added bonus, if not I'll dump it and we'll discuss shipping. Would work great with an 860 Performance Bottle Mount with Brackets.
860 Performance Bottle Mount/Brackets -- SOLD
So like I said -- don't lowball me in the nuts and I'll be happy to work with you. Shoot me a PM or respond in this thread and we can further discuss things via email. Thanks.
My loss is your gain -- everything is priced to sell. Be realistic, don't lowball me in the nuts, and I'll be happy to ship stuff for cheap/free.
Everything is located in Gainesville, Florida. I'm really not too interested in driving to drop parts off, but I can possibly meet halfway if you're in Ocala/Jax. Otherwise, plan on it being shipped.
Dynotune Bottle Heater -- SOLD
Dynotune Digital Nitrous Pressure Gauge -- SOLD
NX Iceman Fuel and N2O Solenoids -- SOLD
Misc. Nitrous Lines and NX Shark Nozzle w/Bottle Nut -- See Below
Fuel Lines--
-4AN Swivel fitting (I used it on the test port on the back of my LT1 Fuel Rail)
12" -4AN SS Braided Line -- SOLD
Black Annodized Y-Block -4AN--1/8" NPT in to -3AN & -4AN Out -- $15 Shipped
40" -3AN Black SS Braided Line to Solenoid -- $20 Shipped
48" -3AN Black SS Braided Line to Nozzle -- $25 Shipped
12" -4AN SS Braided Line -- SOLD
Nitrous Lines--
48" -3AN Black SS Braided Line to Nozzle -- $25 Shipped
16' 6" -4AN Nitrous Source Line from Bottle to Solenoid (Standard Issue NX Line) -- SOLD
NX Shark Nozzle -- SOLD
Close up of the Black Lines
10lb NX/Compucar/Wilson Bastard Bottle -- $150 (Prefer Local Pickup)
10lb Nitrous Express Bottle. Compucar Nitrous valve with Wilson Manifolds cone filter and -4AN fitting. Works brilliantly. The bottle is currently full, so I'd love to just sell it locally with an added bonus, if not I'll dump it and we'll discuss shipping. Would work great with an 860 Performance Bottle Mount with Brackets.
860 Performance Bottle Mount/Brackets -- SOLD
So like I said -- don't lowball me in the nuts and I'll be happy to work with you. Shoot me a PM or respond in this thread and we can further discuss things via email. Thanks.
Last edited by WhyHelloOfficer; 04-28-2009 at 01:11 PM. Reason: Parts Sold.
#5
12 Second Club
Thread Starter
iTrader: (5)
Join Date: Jul 2006
Location: Tampa, Fl
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
The entire gauge/harness/sending unit/directions are included.
Trending Topics
#11
12 Second Club
Thread Starter
iTrader: (5)
Join Date: Jul 2006
Location: Tampa, Fl
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RADO_4U2NV
+1 Got the line. Looks great thanks. May get your bottle too.
#14
12 Second Club
Thread Starter
iTrader: (5)
Join Date: Jul 2006
Location: Tampa, Fl
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
How much more of a deal do you want?
Brand new you're looking at an automatic heater for $190-$200. I don't frequent LS1tech too often anymore so I don't know the going rate for a used heater anymore. Is $80 shipped really asking too much?
Sorry -- I'm finishing up my 131 page thesis and attempting to get it printed and ready for defense on Friday. I'll get the estimate to you ASAP.
FYI -- the solenoids and feedline is pending sale.
Brand new you're looking at an automatic heater for $190-$200. I don't frequent LS1tech too often anymore so I don't know the going rate for a used heater anymore. Is $80 shipped really asking too much?
Sorry -- I'm finishing up my 131 page thesis and attempting to get it printed and ready for defense on Friday. I'll get the estimate to you ASAP.
FYI -- the solenoids and feedline is pending sale.
#16
12 Second Club
Thread Starter
iTrader: (5)
Join Date: Jul 2006
Location: Tampa, Fl
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
Updates:
Solenoids, Main Line and Shark Nozzle have been sold.